Note: If you are traveling long distances, you may need to repeat this procedure periodically if you hear interference from local FM stations. This is due to the differences in the strength of FM stations being broadcast in these areas, and not to any problems associated with your SKYFi2.
In the rare situation that you cannot find an acceptable open FM frequency, consult a professional audio installer. You may improve the audio quality
by using the Delphi FM Direct Adaptor (SA10112), sold separately.
Adjusting the Audio Level
The factory default setting should work well in most situations. However, if you hear distortion, you should decrease the audio level. If the XM audio level is too low compared to other sources such as CD, cassette, or other FM stations, you may want to increase the audio level.
1.Press the “menu” button.
2.Use the scroll wheel (or remote) to select “Audio Level.” Press the “XM” button to confirm.
3.Use the scroll wheel (or remote) to select the desired level. Press the “XM” button to confirm selection.
4.Press the “menu” button to return to the main menu and then again to return to normal operation.
Note: This is not a volume control. This feature should be used to better match the SKYFi2 audio level with the other audio sources in the receiver. Set the volume using the audio system or FM radio connected to your SKYFi2.
15
Advanced Features