Uniden UH077 owner manual Removing Open Scan Channels, Normal Openscan Channel OFF

REMOVING OPEN SCAN CHANNELS

When the radio is initially powered up from the box, all 40 channels will be programmed into the OPEN SCAN MEMORY.

If you do not wish to scan any particular channels (e.g. if one or more channels are continu- ally busy and always causing the scanning function to pause), you may remove these channels from the scan group using the following sequence.

1.Select the NORMAL mode by selecting the SCAN switch (3) to the OUT position.

2.Select the OPEN SCAN mode by selecting the OS/GS Select switch (4) to the IN posi- tion. The OS indicator (11) should be lit. The GS indicator should NOT be lit.

3.Rotate the CHANNEL SELECTOR switch (20) until the channel you wish to REMOVE is displayed on the LED CHANNEL indicator (12).

Note that MEM indicator is lit, showing you that this channel is currently included in the scan group.

4.PRESS and HOLD the MEM switch (16) for about 2 seconds until a BEEP is heard twice.

,

NOTE: that the MEM indicator is now extinguished.

Select

Select

Select

Remove

'MEM'Light

NORMAL

OPENSCAN

CHANNEL

CHANNEL

OFF

0

unlOen

I

SCAN

:

MEM

-

~

~

I

+

+

UH-O77

+

~

U

=

(UJ

'-'I

,

G

~

~

-- x

.I. j

I I - X

.I.-II IrOD

)

t}

1

I

I ~,

'_I

-BEEP!..

The selected channel has now been removed from the scan group and will not be included when scanning has commenced and the MEM indicator will not light on that channel.

Continue steps 3 and 4 to remove any other channels you do not wish to scan.

-11-