Teac Setting Up Your DAB Tuner and Auto Tuning for DAB Systems

Setting up your DAB Tuner

The first time you listen to the DAB radio, it will scan for DAB channels and build a channel list.

To enter the DAB mode, turn the unit on, and select DAB by pressing the SOURCE button and the BAND button.

The following screen will display for 2 seconds.

The unit will scan for broadcast services in the local area and add them to the channel list as they are found. The scan should take about 10 seconds.

As channels are added to the channel list the number of channels found is displayed.

After broadcast services have been found the channels are listed in alphanumeric order.

<If no broadcast services are found, please check that the antenna is correctly connected to the unit.

Auto Tuning

If you move the unit to a new area or you want to check to see if there are new channels available in your area, you can scan to find new channels automatically.

Press the AUTO TUNE button.

The unit will scan for any new channels and add the channels found to the channel list.

<Press and hold the AUTO TUNE button for longer than 2 seconds to activate international search.

25