CD Player
Cannot play.
eLoad a disc with label side up.
eIf the disc is dirty, clean the surface of the disc.
eA blank disc has been loaded. Load a prerecorded disc.
eUnfinalized
Sound skips.
ePlace the unit on a stable place to avoid vibration and shock.
eIf the disc is dirty, clean the surface of the disc.
eDon’t use scratched, damaged or warped discs.
No program playback.
eIn the stop mode press PROGRAM button to enter the program mode, and press the PLAY button (y) to start playing.
MP3/WMA
There is no sound even if the PLAY button (y) is pressed.
eCheck if there are MP3 or WMA files on the USB.
e
‘No song title No artist No album’ appears on the display.
eThere is no ID3 tag information for the music file. Edit the song title, artist, and album information of the song on a PC using the MP3 or WMA making application.
Some unknown characters are displayed on the display panel.
eThis unit cannot display symbols and
If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to remove any fluid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit.
Beware of condensation
When the unit (or a disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, leave the unit for one or two hours with the power turned on. The unit will stabilize at the temperature of its surroundings.
43