Panasonic DY-CB9 operating instructions Accessories, How to connect the headphones, Folding method

Page 3

Accessories

Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of January 2006. These may be subject to change.)

2 Stereo headphones (RP-HT40)

1 Headrest Mounting Bracket (RXQ1405A)

1 Monitor holder (RGQ0442-K)

How to connect the headphones

Portable DVD/CD Player

Headphone

Input plug

 

(Illustrations in these operating

(3.5mm (1/8q) L-shaped

If the housings do not fit,

Jack

instructions are of DVD-LS91.)

stereo mini plug)

move up or down.

Folding method

How to install the Headrest Mounting Bracket and the Portable DVD Player.

You can enjoy video in the back seat attaching the unit to the back of the front seat.

1 Attaching the Headrest Mounting Bracket to the front seat.

1Adjust the headrest so there is an open space of about 3 cm.

Side view

Headrest

Mounting

Bracket

2Close the buckle and adjust the belt until it fits tightly around the headrest.

2 Attaching the monitor holder.

3 Attaching the unit to the bracket.

While holding the unit with both hands, line it up just below the protruding sections on the bracket as shown in the illustration on the left.

Press the unit down about 4 to 5 mm until you hear a “click” as it locks into place. At this point, line the protruding sections up with the holes on the bottom of the player.

Line up the protruding

When correctly

click!

sections here.

attached,

 

you will hear a

 

 

locking sound.

 

1Fold the monitor down towards the front of the unit and attach the monitor holder

2Rotate the monitor backwards so the screen is facing out, and lock into place with the monitor holder.

Monitor holder (included)

Refer to the following illustration for lining up the protruding sections on the bracket with the holes on the back of the unit.

Diagram of attached bracket

Use the monitor in the open position as shown in the illustration to the right to prevent abnormal audio or damage resulting from vibrations in the car.

The angle of the monitor can be adjusted up to about 30 degrees.

Check that the monitor is locked into position.

The angle of the monitor may shift while driving due to vibration, etc.

Detaching the monitor

Press the monitor holder as shown to detach it.

After use, detach the monitor holder from the unit. You can store it in the bracket.

Depending on the type of headrest, you may not be able to attach the bracket.

23cm or less

Releasing the unit from the bracket

1Press the release buttons (left and right)

in towards the center of the bracket.

2Lift the unit up to release it.

Press the release buttons only when detaching the unit.

Image 3
Contents Dear customer SpecificationsProduct Service Portable DVD Car KitCertificat de garantie limitée Panasonic/Technics For\U.S.AAttaching the Headrest Mounting Bracket to the front seat AccessoriesHow to connect the headphones Folding methodAccessories