Clarion BLT433 owner manual Using your CM-HS1, Operating Modes

English

Using your CM-HS1

Operating Modes

Once the CM-HS1 has been paired to a phone, it will enter either Listening or Connected mode.

In Listening mode the CM-HS1 will be available to establish a connection to any of the paired devices in response to an incoming call. This is typical of phones connected as a Headset.

In Connected mode, the CM-HS1 is connected to a particular phone and communication to another paired phone is not possible. In this mode the CM-HS1 will respond quicker however most phones have a timeout that drops out of Connected Mode after a few minutes.

See your phone owner’s manual for details on the operation.

Connection

Basically, after pairing process, a Bluetooth connection is established between your mobile-phone and the CM-HS1 module when the ignition of your vehicle is switched on.

Some phone model may require to you activate this connection by pressing a short time the CM-HS1 answering button.

Making a call

There are different ways to make a call.

Calling with the phone’s keypad

1.Using the phone keypad, dial the phone number.

2.Press the phone “send” key - the phone is now connected to the module and your car stereo system will be mute. Talk normally to the module, the person you’re talking to will be heard through your car speaker.

10 BLT433