Pairing your CM-HS1

3. a) Press together , once if choose handsfree profile. (Blue and Red

LED fast blinking alternately)

b)Press together , twice if

choose headset profile. (Blue and Red LED slow blinking alternately)

4.Your mobile phone will display once it detects the device.

a)HF - CMHS1 - HF (Handsfree profile).

b)HS - CMHS1 - HF (Headset profile).

5.Confirm the pairing device and the passkey or PIN is ‘0000’ and you’re successfully pair the module.

6.The constant Lit Blue LED will indicate your device has been paired and it’s ready to used.

Note: CM-HS1 support up to 5 paired mobile phone, but only one phone at a time with the car handsfree. To clear the paired device table just long

press and together.

Once you have paired the car handsfree with your phone, you can make and receive calls using the control panel (CM-HS1 module) of the car handsfree, as long as it is turned on and within range of the phone, with no solid objects in between.

Always make sure the Bluetooth® operation mode in the phone is on when using a Bluetooth® car handsfree.

Compatible with most Clarion CeNET units from 2001 lineup. For detail please check compatibility chart on www.clarion-eu.com, or consult your Clarion dealer.

English

BLT433 9