Radio Mode Operations

Listening to the radio

1.Press the [SRC] button and select the Radio mode, then the radio will be on.

2.To select a preset band, press the [BND] button, then select one of the preset bands such as FM1, FM2, FM3 or AM. Every time the [BND] button is pressed, the display will change as:

FM1FM2FM3AMFM1...

3.Press the [,] button to tune in the desired station.

Seek tuning

1.Press the [BND] button and select the desired band (FM or AM).

∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek tuning is now available.

2.Press the [,] button to start automatic station tuning.

When the [] button is pressed, search will be performing in the direction of higher fre- quencies. When the [] button is pressed, search will be performed in the direction of lower frequencies.

Step tuning:

Press the [,] button to perform manual tuning.

Preset memory function

Preset memory function can store up to 24 sta- tions:

Six stations for each of FM1, FM2, FM3 and AM.

Manual memory function

1.Press the [BND] button, to select a band you want to store in the memory.

2.Press the [,] button to tune into a desired station.

3.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previ- ously stored station remains un-overwritten at the memory position.

1.Press the [BND] button and select the desired band (FM or AM).

English

Manual tuning

There are 2 ways available: Quick tuning and step tuning.

When you are in the step Tuning mode, the fre- quency changes one step at a time. In the quick Tuning mode, you can quickly tune the desired frequency.

1.Press the [BND] button and select the desired band (FM or AM).

∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning is now available.

2.Tune into a station.

Quick tuning:

Press and hold the [,] button for 1 second or longer to begin station tuning.

2.Press and hold the [ ] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.

1.Press the [] button.

2.When a desired station is tuned in, press the [ ] button again to continue receiving that station.

Note:

Be careful not to press and hold the [ ] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing sta- tions.

DB566USB 13