English
CD/MP3/WMA Mode Operations
Loading a CD
Insert a CD into the center of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD plays automatically after loading.
Notes:
Never insert foreign objects into the CD SLOT.
If the CD is not inserted easily, there may be an- other CD in the mechanism or the unit may require service.
Discs not bearing the mark and
Some CDs recorded in
Loading 8 cm compact discs
∗No adapter is required to play an 8 cm CD.
∗Insert the 8 cm CD into the center of the insertion slot.
For CD/MP3/WMA playback, please refer to "Op-
erations Common to CD and USB Drive".
USB Mode Operation
What is USB?
USB is the abbreviation of Universal Serial Bus, an external bus standard that supports data transfer rates of 12Mbps. The main unit is USB
2.0compatible. (It is compliant with Universal Se- rial Bus Revision 1.1 specification, which is Full Speed supported but not running at
Supported audio files playback
Only MP3 and WMA files are currently support- ed. For further information on MP3/WMA play- back, please refer to "Operations Common To CD and USB Drive".
Hot plugging function
When the unit is powered on, this function allows you to start playing the tracks automatically when the USB drive is inserted.
!CAUTION
Do not try to put your hand or fingers in the USB insertion port. Also never insert foreign objects into the port.
Do not insert USB devices other than “USB mass storage class” as this will have no function to the main unit or device and may have unexpected result.
The main unit cannot be connected with the personal computer or laptop.
USB drive that contains WMA files with DRM protected will not be read by the main unit.
Reading time for a USB drive may differ depends on the contents of the data.
USB drive insertion may result in protruding as it might be dangerous to the user while driving. For safety purposes, it is advisable to use an USB extension cable to connect between the USB drive and the USB port on the main unit.
16 DB566USB