Clarion DMX5555Z owner manual Error Displays Specifications

9. ERROR DISPLAYS

10. SPECIFICATIONS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

	Error Display	Cause	Measure
	ERROR 2	A CD is caught inside the CD deck and is	This is a failure of CD deck’s mechanism
CD		not ejected.	and consult your store of purchase.
	ERROR 3	A CD cannot be played due to scratches,	Replace with a non-scratched, non-warped
		etc.	disc.
	ERROR 2	An MD is caught inside the MD deck and	This is a failure of MD deck’s mechanism
MD		is not ejected.	and consult your store of purchase.
	ERROR 3	An MD cannot be played due to scratches,	Replace with a non-scratched,
		etc.	non-warped-disc.
	ERROR 2	A CD inside the CD changer is not loaded.	This is a failure of CD changer’s mecha-
changerCD			nism and consult your store of purchase.
	ERROR 6	A CD inside the CD changer cannot be	Eject the disc then reload it properly.
	ERROR 3	A CD inside the CD changer cannot be	Replace with a non-scratched, non-warped
		played due to scratches, etc.	disc.
		played because it is loaded upside-down.
	ERROR H	Displayed when the temperature in the MD	Lower the surrounding temperature and
		changer is too high and playback has been	wait for a while to cool off MD changer.
changer		stopped automatically.
	ERROR 2	An MD inside the MD changer is not	This is a failure of MD changer’s mecha-
		loaded.	nism and consult your store of purchase.
MD
	ERROR 3	An MD inside the MD changer cannot be	Replace with a non-scratched, non-warped
		played due to scratches, etc.	disc.
	ERROR 6	Displayed when a non-recorded MD is	Load a pre-recorded MD in the MD
		loaded in the MD changer.	changer.

FM Tuner

Frequency Range:

87.9 MHz to 107.9 MHz

Usable Sensitivity: 11 dBf

50dB Quieting Sensitivity: 17 dBf

Alternate Channel Selectivity: 75 dB

Stereo Separation (1 kHz):

35 dB

Frequency Response (± 3 dB):

30 Hz to 15 kHz

AM Tuner

Frequency Range: 530 kHz to 1710 kHz

Usable Sensitivity: 25 ∝ V

CD Player

Frequency Response (± 1 dB): 10 Hz to 20 kHz

Signal to Noise Ratio (1 kHz): 100 dB

Dynamic Range (1 kHz): 95 dB

Harmonic Distortion: 0.01%

Audio

Maximum Power Output: 160 W (40 W ⋅ 4 ch) (EIAJ)

Continuous Average Power Output:

14 W ⋅ 4, into 4 Ω , 20 Hz to 20 kHz, 1%THD

Bass Control Action (30 Hz):

±15 dB

Treble Control Action (10 kHz):

±10 dB

Line Output Level (MD 1 kHz): 4 V

General

Power Supply Voltage:

14.4V DC (10.8 to 15.6 V allowable), negative ground

Current Consumption:

Less than 15 A

Speaker Impedance:

4 Ω (4 Ω to 8 Ω allowable)

Weight / Source unit: 5.5 lb. (2.5 kg)

Weight / Remote control unit:

1 oz. (30 g) (including battery)

Dimensions / Source unit:

7" (Width) ⋅ 3-15/16" (Height) ⋅ 6-1/8" (Depth) [178 (W) ⋅ 100 (H) ⋅ 155 (D) mm]

Dimensions / Remote control unit:

1-3/4"(Width) ⋅ 4-5/16"(Height) ⋅ 1-1/8"(Depth) [44 (W) ⋅ 110 (H) ⋅ 27 (D) mm]

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

24 DMX5555z

MD Player

Frequency Response (± 2 dB): 20 Hz to 20 kHz

Signal to Noise Ratio (1 kHz): 90 dB

Dynamic Range (1 kHz): 85 dB

Harmonic Distortion: 0.01%

Notes:

•Specifications comply with EIA Standards.

•US and foreign patents licensed from Dolby Laboratories Licensing Corporation.

•Specifications and design are subject to change without notice for further improvement.

DMX5555z 25

280 7323 00 280 7323 00