Clarion DXZ525 Basic Operations, Adjusting the tone Adjusting the treble Gain, Frequency

		Basic Operations
Adjusting the tone		Adjusting the treble (Gain,
Press the [A-M] button and select the item to		Frequency)
adjust. Each time you press the [A-M] button,		This adjustment can be performed when the Z-
the item changes in the following order:
		Enhancer Plus is set to “CUSTOM”.
●When “B BOOST” is set		1. Press the [A-M] button and select “TREB”.
“B BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜ “LOUD
		2. Turning the [ROTARY] knob clockwise em-
OFF” ➜ Last function mode.
		phasizes the treble; turning it counterclock-
●When “IMPACT” is set
		wise attenuates the treble.
“IMPACT” ➜ “BAL 0” ➜ “FAD 0”	➜ “LOUD	∗ The factory default setting is “T<G 0>”. (Ad-
OFF” ➜ Last function mode.		justment range: –6 to +6)
●When “EXCITE” is set		3. Press the [d] or [a] button to select “T<F
“EXCITE” ➜ “BAL 0” ➜ “FAD 0”	➜ “LOUD	10>”.
		Turninng the [ROTARY] knob clockwise or
OFF” ➜ Last function mode.
●When “CUSTOM” is set		counterclockwise to select the frequency.
		∗ The factory default setting is “T<F 10>”.(Ad-
“BASS” ➜ “TREB” ➜ “BAL 0” ➜ “FAD 0” ➜
		justment 10 kHz/15 kHz)
“LOUD OFF” ➜ Last function mode.
		4. When the adjustment is complete, press the
●When “Z+ OFF” is set
		[A-M] button several times until the function
“BAL 0” ➜ “FAD 0” ➜ “LOUD OFF” ➜ Last
		mode is reached.
function mode.

English

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclock- wise attenuates the bass.

∗The factory default setting is “B<G 0>”. (Ad- justment range: –6 to +6)

3.Press the [d] or [a] button to select “B<F 60>”.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency.

∗The factory default setting is “B<F 60>”.(Ad- justment 60/100/200 Hz)

4.Press the [d] or [a] button to select “B<Q 1>”.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the Q-curve.

∗The factory default setting is “B<Q 1>”.(Ad- justment 1/1.25/1.5/2)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BAL”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “BAL 0”. (Adjust- ment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FAD”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “FAD 0”. (Adjust- ment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

DXZ525 13