Operations Common to Each Mode

CD Operations

Scan play

The scan play locates and plays the first 10 sec- onds of each track on a disc automatically. This function continues on the disc until it is cancelled.

∗The scan play is useful when you want to select a desired track.

1.Press the [SCN] button to start scan play. “SCN” lights in the display.

2.To cancel the scan play, press the [SCN] but- ton again. “SCN” goes off from the display and the current track continues to play.

Repeat play

The repeat play continuously plays the current track. This function continues automatically until it is cancelled.

1.Press the [RPT] button. “RPT” lights in the dis- play and the current track is repeated.

2.To cancel the repeat play, press the [RPT] but- ton again. “RPT” goes off from the display and normal play resumes.

Random play

The random play selects and plays individual tracks on a disc in no particular order. This function con- tinues automatically until it is cancelled.

1.Press the [RDM] button. “RDM” lights in the display, an individual track is selected ran- domly and play begins.

2.To cancel the random play, press the [RDM] button again. “RDM” goes off and normal play resumes.

Hi / Lo dimmer control

You can adjust the reduced illumination level of the dimmer.

∗The factory default setting is “ON”.

1.Press and hold the [A-M] button for 1 second or longer to switch to the adjustment selec- tion display.

2.Press the [a] or [d] button to select “DIM- MER”.

3.Turn the [ROTARY] knob clockwise to “ON” or counterclockwise to “OFF”.

4.Press the [A-M] button to return to the previ- ous mode.

AUX function

This system has an external input jack so you can listen to sounds and music from external devices connected to this unit.

Selecting AUX IN sensitivity

Make the following settings to select the sensi- tivity when sounds from external devices con- nected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “MID”.

1.Press and hold the [A-M] button for 1 second or longer to switch to the adjustment selec- tion display.

2.Press the [a] or [d] button and select “AUX SENS”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and select from “HIGH”, “MID” or “LOW”.

4.Press the [A-M] button to return to the previ- ous mode.

Setting the clock

1.Press and hold the [A-M] button for 1 second or longer to switch to the adjustment selec- tion display.

2.Press the [a] or [d] button to select “CLOCK En”.

3.Press the [s] button.

4.Press the [a] or [d] button to select the hour or the minute.

English

DXZ525 17