Clarion DXZ735MP owner manual CD/MP3/WMA Operations

Page 9

CD/MP3/WMA Operations

CD/MP3/WMA Operations

English

MP3/WMA

What is MP3?

MP3 is an audio compression method and clas- sified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format.

2.Files without MP3/WMA data will not play. The indication ––:–– appears in the play time display if you attempt to play files with- out MP3/WMA data.

Logical format (File system)

1. When writing MP3/WMA file on a CD-R disc

or CD-RW disc, please select “ISO9660 level

Setting

Set to CD

Set to MP3/WMA

Disc

 

 

Mixed with CD and

Play CD

Play MP3/WMA

MP3/WMA type tracks

CD type track only

Play CD

Play CD

MP3/WMA type track only

Play MP3/WMA

Play MP3/WMA

 

 

 

When the unit enters the CD/MP3/WMA mode, play starts automatically.

If there is no disc loaded, the indication “NO DISCappears in the title display.

The mode changes each time the [FNC] button is pressed. (Modes are not displayed for equipment that is not connected.)

English

This MP3 features the original audio data com- pression to about 10 percent of its initial size with a high sound quality. This means that about 10 music CDs can be recorded on a CD-R disc or CD-RW disc to allow a long listening time without having to change CDs.

What is WMA?

WMA is the abbreviation of Windows Media Au- dio, an audio file format developed by Microsoft Corporation.

Notes:

If you play a file with DRM (Digital Rights Man- agement) for WMA remaining ON, no audio is output.

Windows Media™, and the Windows ® logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

To disable DRM (Digital Rights Management):

1.When using Windows Media Player 7, click on TOOLS OPTIONS CD AUDIO; there, uncheck the ENABLE PERSONAL RIGHTS MANAGEMENT check box, then construct files.

2.When using Windows Media Player for Win- dows XP 8, click on TOOLS OPTIONS COPY MUSIC tab, then under COPY SET- TINGS, unclick the check box for PROTECT CONTENT. Thereafter, reconstruct files.

Personally constructed WMA files are used at your own responsibility.

Precautions when creating MP3/WMA disc

Usable sampling rates and bit rates:

1.MP3: Sampling rate 8k Hz-48 kHz,

Bit rate: 8 kbps-320 kbps / VBR

2.WMA: Bit rate 48 kbps-192 kbps

File extensions

1.Always add a file extension “.MP3” or “.WMA” to MP3 or WMA file by using single byte let- ters. If you add a file extension other than specified or forget to add the file extension , the file cannot be played.

1, 2, 3 or JOLIET or Romeo” as the writing

software format. Normal play may not be pos-

sible if the disc is recorded on another format.

2. The folder name and file name can be dis-

played as the title during MP3/WMA play but

the title must be within 128 single byte alpha-

betical letters and numerals (including an ex-

tension).

3. Do not affix a name to a file inside a folder

having the same name.

Folder structure

1.A disc with a folder having more than 8 hier- archical levels will be impossible.

Number of files or folders

1.Up to 255 files can be recognized per folder. Up to 500 files can be played.

2.Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.)

3.Some noise may occur depending on the type of encoder software used while recording.

Multisession function

When a disc contains both normal CD type tracks and MP3/WMA type tracks mixedly, you can se- lect which type of the recorded tracks to play.

Default value is “CD”.

Each time you press and hold the [BND] button for about 1 second, the mixed mode is switched between CD type or MP3/WMA type. The follow- ing indication appears in the title display when switching the track type to be played.

Display when CD type track is selected:

Display when MP3/WMA type track is se- lected:

1.Types of recording that can be played are as follows.

2.After making these settings, remove the disc and then reinsert it.

3.When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard.

Disc-In-Play function

As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc auto- matically when the disc is inserted even if the power is not turned on.

CAUTION

Do not try to put your hand or fingers in the disc insertion slot. Also never insert for- eign objects into the slot.

Do not insert discs where adhesive comes out from cellophane tape or a rental CD la- bel, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.

Backup Eject function

Just pressing the [Q] button ejects the disc even if the power to the unit was not turned on.

1.Press the [OPEN] button to open the FLIP DOWN PANEL.

Note:

If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.

2.Press the [Q]button. Remove the disc after it is ejected.

3.Close the FLIP DOWN PANEL.

Note:

Always close the FLIP DOWN PANEL once you take out the disc.

Listening to a disc already loaded in the unit

Press the [FNC] button to select the CD/MP3/ WMA mode.

Radio CD/MP3/WMA

(CD changer)

(MD changer)

AUX(TV) (DVD changer)

Loading a CD

1.Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL.

2.Insert a CD into the center of the CD SLOT with the label side facing up. The CD plays automatically after loading.

Notes:

Never insert foreign objects into the CD SLOT.

If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.

Discs not bearing the or mark and CD-ROMs cannot be played by this unit.

Some CDs recorded in CD-R/CD-RW mode may not be usable.

Loading 8 cm compact discs

No adapter is required to play an 8 cm CD.

Insert the 8 cm CD into the center of the insertion slot.

3. Close the FLIP DOWN PANEL.

CAUTION

Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.

Notes:

If the FLIP DOWN PANEL does not open fully, gently open with your hand.

After loading a CD, always close the FLIP DOWN PANEL.

Pausing play

1.Press the [] button to pause play. “PAUSE” appears in the display.

2.To resume CD play, press the [] button again.

16 DXZ735MP

DXZ735MP 17

Image 9
Contents PE-2561K DXZ735MPFeatures ContentsFlip Down Panel Display ItemsHandling Compact Discs LCD ScreenNames of the Buttons and their Functions Controls NomenclatureAttaching the DCP Removing the DCPOpen button Pull the DCP toward you and remove itFunctions of Remote Control Unit Buttons Remote ControlDual Zone RPTBasic Operations OperationsRadio Operations CD/MP3/WMA Operations Selecting a track Displaying CD titles Folder SelectFolder scan play Repeat playOperations Common to Each ModeSetting the button illumination Setting the clockTurning on/off the dual zone mode Volume controlCD/MD Changer Operations Operations of AccessoriesTV Operations Setting the TV diverWatching a TV Watching a videoCase of Difficulty Error DisplaysAM Tuner FM TunerCD Player Audio
Related manuals
Manual 28 pages 41.3 Kb

DXZ735MP specifications

The Clarion DXZ735MP is a highly regarded car stereo receiver that combines advanced technology with user-friendly features, making it a popular choice among automotive audio enthusiasts. This model stands out in the crowded market of car audio systems, thanks to its robust sound quality, versatility, and various connectivity options.

At the heart of the DXZ735MP is its high-performance CD player, which supports a wide range of audio formats, including MP3, WMA, and CD-DA. This ensures that users can enjoy their favorite music recordings without compromise. The receiver is equipped with a powerful built-in amplifier that delivers 45 watts per channel, enabling crisp and clear sound reproduction, even at high volumes.

One of the standout features of the Clarion DXZ735MP is its advanced digital signal processing (DSP) capabilities. This technology allows users to customize their listening experience by adjusting parameters such as equalization, time alignment, and crossover settings. The 3-band parametric equalizer offers precise control over the sound profile, allowing users to tailor the audio output to suit their preferences and vehicle acoustics.

The DXZ735MP is designed with enhanced connectivity options. It includes a front auxiliary input and a USB port, allowing users to easily connect their portable devices, such as smartphones and MP3 players. The unit also features an AM/FM tuner with 18 presets and premium radio features, ensuring that users have access to a wide variety of audio content.

In addition to its audio capabilities, the Clarion DXZ735MP supports Bluetooth technology, enabling hands-free calling and wireless audio streaming. This adds convenience for drivers looking to stay connected while on the road, minimizing distractions and enhancing safety.

Another notable aspect of the DXZ735MP is its sleek and intuitive interface. The bright, easy-to-read LCD display provides clear visibility of track information and settings, while the user-friendly controls, including a rotary volume knob and dedicated buttons, make navigation a breeze.

Overall, the Clarion DXZ735MP is a feature-rich car stereo receiver that blends high-quality audio performance with modern connectivity options. Its combination of DSP technology, robust connectivity features, and an elegant interface makes it an excellent choice for anyone looking to upgrade their in-car audio experience. Whether you're a casual listener or an audiophile, the DXZ735MP offers everything needed for an enjoyable and immersive sound journey on the road.