Clarion XMD3 owner manual Operations of Accessories, CD/MD Changer Operations

English

7. OPERATIONS OF ACCESSORIES

CD/MD Changer Operations

CD/MD changer functions

When an optional CD/MD changer is connected through the CeNET cable, this unit controls all CD/MD changer functions. This unit can control a total of 2 changers (MD and/or CD).

Press the [ PWR ] button and select the CD(MD) changer mode to start play. If 2 CD(MD) changers are connected, press the [ PWR ] button to select the CD(MD) changer for play.

∗If “NO MAG” appears in the display, insert the magazine into the CD changer. “DISC CHK” appears in the display while the player loads (checks) the magazine.

∗If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer.

∗If “NO DISC” appears in the display, load MDs into the MD changer.

CAUTION

CD-ROM discs cannot be played in the CD changer.

Procedure to scroll a title

Set “SCROLL” to “ON” or “OFF”.

(The factory default setting is “ON”. Refer to the subsection “Setting the method for Title scroll” in section “Operation common to each mode”.)

●When set to “ON”

The title is automatically kept scrolling.

●When set to “OFF”

To scroll just 1 time when the title was changed or the [ T ] button was pressed.

Selecting a CD or MD

1.Press the [ UP ] or [ DN ] button to select the desired disc.

∗If a CD is not loaded in a slot of magazine, pressing the [ UP ] or [ DN ] button can not work.

∗If an MD is not loaded in a slot of MD changer, pressing the [ UP ] or [ DN ] button can not work.

Pausing play

1.Press the [ s ] button to pause play. “PAUSE” appears in the display.

2.To resume play, press the [ s ] button again.

Displaying CD titles

This unit can display title data for CD-text CDs and user titles input with this unit.

∗Title data for CD-text CDs can be displayed with this unit only when it is connected to CDC655Tz.

●When connected to DCZ625 or CDC1255z

1. Press the [ D ] button to display the title.

●When connected to CDC655Tz

1.Press the [ D ] button to display the title.

2.Each time you press and hold the [ D ] button for 1 second or longer, the title display changes in the following order:

User title (disc) ➜ CD-text title (disc) ➜ Artist name ➜ CD-text title (track) ➜ User title (disc)...

Notes:

•If the CD playing is not a CD-text CD or no user title has been input, “NO TITLE” appears in the display.

•If a CD-text CD is not input its disc title or a track title, “NO TITLE” appears in the display.

Switching disc titles and track titles(MD)

This unit can display disc titles and track titles already entered on MDs.

∗Titles cannot be entered for MDs with this unit.

1.Press the [ D ] button to display the title. The disc title or track title is displayed.

2.Each time you press and hold the [ D ] button for 1 second or longer, the display toggles between the disc title and the track title.

Note:

•If an MD is not input its disc title or a track title, “NO TITLE” appears in the display.

Selecting a track

●Track-up

1.Press the [ d ] button to move ahead to the beginning of the next track.

2.Each time you press the [ d ] button, the track advances ahead to the beginning of the next track.

●Track-down

1.Press the [ a ] button to move back to the beginning of the current track.

2.Press the [ a ] button twice to move to the beginning of the previous track.

Fast-forward/fast-backward

●Fast-forward

Press and hold the [ d ] button for 1 second or longer.

●Fast-backward

Press and hold the [ a ] button for 1 second or longer.

Scan play

Scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled.

∗The scan play is useful when you want to select a desired track.

1.Press the [ SCN ] button to start track scanning. “SCN” lights in the display.

2.To cancel the scan play, press the [ SCN ] button again. “SCN” goes off from the display and the current track continues to play.

Disc scan play

Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD (MD) changer. This function continues automatically until it is cancelled.

∗Disc scan play is useful when you want to select a desired CD (MD).

1.Press and hold the [ SCN ] button for 1 second or longer. “DISC” and “SCN” light in the display and disc scan play starts.

16 XMD3