Clarion XMD3 owner manual Basic Operations

English

6. OPERATIONS

Basic Operations	Note: Be sure to read this chapter referring to the front diagrams of chapter
	“2. CONTROLS” on page 3 (unfold).
CAUTION	Main display
When this unit is turned on, starting and stopping the engine
of a boat with its volume raised to the maximum level may
harm your hearing.
Be careful about adjusting the volume.	Sub (title) display

IMPORTANT

Door must be totally closed to prevent water go into the set!

OK NG

Turning on/off the power

1.Press the [ PWR ] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3.Press and hold the [ PWR ] button for 1 second or longer to turn off the power for the unit.

Note:

•System check

The first time this unit is turned on after the wire connections are completed, it must check what equipment is connected. When the power is turned on, “SYSTEM” and “PUSH PWR” appear in the display alternately, so press the [ PWR ] button. The system check starts within the unit. When the system check is complete, the power is turned off, so press the [ PWR ] button again.

Selecting a mode

1.Press the [ PWR ] button to change the operation mode.

2.Each time you press the [ PWR ] button, the operation mode changes in the following order:

Radio mode ➜ SIRIUS mode ➜ CD mode ➜ CD changer mode

➜MD changer mode ➜ TV tuner ➜ AUX mode ➜ Radio mode...

∗External equipment not connected with CeNET is not displayed.

Adjusting the volume

Press the [ w ] or [ z ] button increases or decreases the volume.

∗The volume level is from 0 (minimum) to 33 (maximum).

Switching the Display

Press the [ D ] button to select the desired display.

Each time you press the [ D ] button, the display switches in the following order:

Clock display

Main display

∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display several seconds after the adjustment.

∗When you have entered a title in a CD, it appears in the sub display. If you have not entered a title, “NO TITLE” appears in the title display instead. For information on how to enter a title, refer to the subsection “Entering titles” in section “Operations Common to Each Mode ”.

Setting the Z-Enhancer Plus

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “Z+ OFF”.

Each time you press the [ Z+ ] button, the tone effect changes in the following order:

“Z+ OFF” ➜ “B-BOOST” ➜ “IMPACT” ➜ “EXCITE” ➜ “CUS-

TOM” ➜ “Z+ OFF” ...

•B-BOOST : bass emphasized

• IMPACT	: bass and treble emphasized
• EXCITE	: bass and treble emphasized mid de-emphasized

•CUSTOM : user custom

• Z+ OFF : no sound effect

Adjusting the tone

Press the [ A-M] button and select the item to adjust. Each time you press the [ A-M] button, the item changes in the following order:

●When “B-BOOST” is set

“S-VOL 0” ➜ “B-BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜ Last func- tion mode.

●When “IMPACT” is set

“S-VOL 0” ➜ “IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ Last func- tion mode.

●When “EXCITE” is set

“S-VOL 0” ➜ “EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last func- tion mode.

●When “CUSTOM” is set

“S-VOL 0” ➜ “BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FAD 0” ➜

Last function mode.

●When “Z+ OFF” is set

“S-VOL 0” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

∗If sub-woofer is effective, “S-VOL 0” can be selected.

10 XMD3