Clarion VRX925VD owner manual Zone 1 front monitor lock, Zone 2 rear monitor lock, Others Navi

English Owner’s manual

VISUAL Operations

●Lock system monitor image and sound

		2 ZONE
	Front monitor lock		Rear monitor	3 ZONE
(∗1)	Visual 2 connection	Visual 2 connection
			lock
	[OTHERS]	[NAVI]
Front image	Image of device	Image of device	Displays image of	Image of device
(receiver	connected to the	connected to the	mode selected	connected to the
screen)	Visual 2 terminal	Visual 2 terminal	using the [FUNC]	Visual 2 terminal
	(∗3)		button	(∗3)
Rear monitor	Image of device	Displays image of	Image of device connected to the
image	connected to the	mode selected	Visual 1 terminal
(separately	Visual 2 terminal	using the [FUNC]
sold)	(∗3)	button (∗2)
Vehicle speaker	Plays sound of mode selected using the [FUNC] button
sound

∗1 A device connected to the Visual 2 terminal should be set up as described in the section “Switch- ing Connect.”

∗2 No image is displayed on the rear monitor when a non-image mode such as radio, SIRIUS, CD, etc. is engaged.

∗3 For safety reasons, this image is not displayed when the vehicle is moving. The picture can be watched only when the vehicle is standing still and the parking brake is engaged.

2-ZONE: 1 (front monitor lock)

1.Press the [M.L] button.

2.Press the [FUNC] button to select the de- sired mode.

3.To cancel the monitor lock, press the [M.L] button.

The screen shows the image of the selected mode.

∗When the front monitor lock is engaged,

[MENU], [LIST], [KEY PAD], [ADJ] and [A-M] button cannot be used. Cancel the monitor lock when you wish to use these buttons.

2-ZONE: 2 (rear monitor lock)

1.Press the [ADJ] button to display the AD- JUST MODE menu.

2.Touch the [REAR MONI LOCK] key and the [ON] key.

3.Touch the [RTN] key or press the [ADJ] but- ton.

4.To cancel the monitor lock, press [ADJ] but- ton, touch the [REAR MONI LOCK] key and the [OFF] key.

5.Touch the [RTN] key or press the [ADJ] but- ton.

The monitor lock is now canceled.

Locking the front monitor and rear monitor (3-ZONE)

1.Lock the rear monitor by performing the in- structions in steps 1 to 3 above.

2.Press the [M.L] button to lock the front moni- tor.

3.Press the [FUNC] button.

The image for the selected mode is dis- played for about 5 seconds after which the front monitor lock image is displayed.

4.To cancel the monitor lock, press the [M.L] button.

5.To cancel the rear monitor lock, press the

[ADJ] button, touch the [REAR MONI LOCK] key and the [OFF] key.

44 VRX925VD