TV Operations
Manual memory
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station to that preset memory.
Auto store
Auto store selects 6 TV stations automatically and stores each one into a preset memory.
If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory.
1.Press the [BAND] button and select the desired TV band. (TV1 or TV2)
2.Touch the screen or press the [LIST] button, the MENU screen appears.
3.Touch the [SUB MODE] key in the MENU screen, the [AUTO STORE] key appears in the display.
Touch and hold the [AUTO STORE] key for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
2.Touch the [TV] key to select “TV DIVER”.
Touch the [TV DIVER] key to display [ON]/ [OFF] key.
3.Touch the [ON] key or [OFF] key to set the selected reception setting.
● ON:
Sets reception emphasizing the visual.
●OFF:
Sets the diver setting to OFF.
4.Press the [ADJ] button or touch the [RTN] key to return to the previous mode.
English Owner’s manual
Preset scan
Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for desired TV station in memory.
1.Touch the screen or press the [LIST] button, the MENU screen appears.
2.Touch the [SUB MODE] key in the MENU screen, the [PRESET SCAN] key appears in the display.
Touch the [PRESET SCAN] key to start preset scan. The unit starts scanning each station for 7 seconds sequentially.
3.When the desired channel is received, touch the [PRESET SCAN] key again.
Setting the TV diver
∗This function is enabled only when the panel is open.
∗Normally use the TV diver with the “ON” position.
You can change the reception setting for the TV antenna connected to the TV tuner.
1.Press the [ADJ] button to switch to the ADJUST MODE menu.
VRX925VD 51