APX480M manual.qxd 3/12/2004 1:07 PM Page 11
Operation/Installation Manual
Mixed-Mode System On Rear; Full-Range
Speakers On Front
FREQ (hz) | L (mH) | C (uF) |
| | |
80 | 8.0 | 497 |
100 | 6.4 | 398 |
125 | 5.1 | 318 |
150 | 4.2 | 265 |
200 | 3.2 | 199 |
| | |
NOTE: Chart values based on 4 Ohm speakers.
Figure 8
The amplifier can be configured for a mixed-mode operation on either channels 1/2 or 3/4 amplifier sections. The table provides component values to create a 6dB per octave crossover at specified frequencies. Use components that have a + 5% tolerance and capacitors rated at 100V. NOTE: Choose the same frequency for both LP and HP crossovers. Do not overlap frequencies, as this may damage the amplifier.
