APX480M manual.qxd 3/12/2004 1:07 PM Page 14
APX480M Power System Amplifier
Problem
Amplifier fuse keeps blowing.
Solution
Incorrect wiring or short circuit. Review Installation and check all wiring connections.
Problem
Whining or ticking noise in the audio with engine on.
Solution
Amplifier is picking up alternator noise or radiated noise. Turn down input gain; move audio cables away from power wires. Check power and ground connections on amplifier; install an
PRODUCT SPECS
Frequency Response | 20Hz ~ 20kHz |
Signal Noise Ratio | >95db |
THD | .05% all channels driven |
Input Sensitivity Low Level | 250mV ~ 2.5V |
Input Sensitivity Speaker Level | 500mV ~ 5V |
Max. Power Output | 640W (160 x4) |
Cont. Power Output | 320W (80W x4) @.05% THD |
115W x 4 @ .5% THD | |
Bridged Power | 230W x 2 @ .5% THD |
Dimensions | 2 1/8” H x 8 1/4” W x 12” L |
Current Consumption @ Max | 46A @ 640 Watts |
Power Output |
|
12