How to Use the Menu Functions
Menu
Sound
Item | Adjustments / Configurations (alternatives) | |
| Adjust the frequency level to suit your favourite sound quality | |
| ●This function is available when [Mode] is set to [User]. | |
| ●Select the frequency band with the left / right cursor button and change the | |
| frequency level with the up / down cursor button. | |
Equaliser | ●If you want to enhance the bass sound, raise the level of the lower frequency. | |
| If you want to enhance the treble sound, raise the level of the higher | |
| frequency. | |
| ●To reset the levels of each frequency to the default settings, select [Reset to | |
| Defaults] using the left / right cursor button, and then press the OK button. | |
Balance | Adjusts the volume level of the right and left speakers | |
Headphone Volume | Adjusts the volume of the headphones | |
Surround | Surround sound settings | |
• Off | ||
effects | ||
• | ||
●Switching is also possible by the Surround button on the remote control (p. 9). | ||
| ||
Volume Control (VAO) | Select to adjust the volume of the audio output | |
[TV]: Only the volume of TV speakers is adjustable. | ||
• TV | ||
[Audio Out (TV Off)]: Only the volume of Audio Out is adjustable and mute the | ||
• Audio Out (TV Off) | ||
TV speaker’s volume. | ||
• TV and Audio Out | ||
[TV and Audio Out]: The volume of TV speakers and Audio Out is adjustable. | ||
| ||
Auto Gain Control | Adjusts the current volume level if it is extremely different from the previous | |
• Off | ||
viewed channel or input mode | ||
• On | ||
| ||
Volume Correction | Adjust the volume of individual channel or input mode | |
Speaker Distance to | Adjust the low frequency sound | |
●If the space between the back of TV and wall is over 30 cm, [Over 30cm] is | ||
Wall | ||
recommended. | ||
• Over 30cm | ||
●If the space between the back of TV and wall is within 30 cm, [Up to 30cm] is | ||
• Up to 30cm | ||
recommended. | ||
| ||
MPX | Select multiplex sound mode (if available) | |
• Stereo | ||
●[Stereo]: Use this normally | ||
• Mono | ||
●[Mono]: When stereo signal cannot be received | ||
• M1 | ||
●[M1] / [M2]: Available while mono signal is transmitted | ||
• M2 | ||
| ||
| SPDIF: A standard audio transfer file format | |
| Selects the initial setting for digital audio output signal from HDMI2 terminal | |
SPDIF Selection | [Auto]: Dolby Digital is output as Dolby Digital Bitstream. | |
• Auto | are output as PCM. | |
• PCM | [PCM]: Digital output signal is fixed to PCM. | |
| ●Video mode (p. 41) or Network video contents (p. 52) | |
| ●Amplifier with ARC (Audio Return Channel) only | |
HDMI1 / 2 / 3 Input | Select to fit the input signal (p. 63) | |
[Digital]: HDMI cable connection | ||
• Digital | ||
[Analogue]: | ||
• Analogue | ||
●HDMI input mode only | ||
| ||
Reset to Defaults | Press the OK button to reset settings of the present [Mode], [Balance], | |
[Headphone Volume] and [Surround] in the Sound Menu to the default | ||
|
M
S t
28
2/16/2012 5:21:40 PM