Using the Media Player
Media Player allows you to enjoy photo, music or video recorded on a USB Flash Memory.
ƔThe picture may not appear correctly on this TV depending on the digital cameras used.
ƔDisplay may take some time when there are many files and folders in the USB Flash Memory.
ƔPartly degraded files might be displayed at a reduced resolution.
ƔThe folder and file names may be different depending on the digital camera used.
1Insert the USB Flash Memory
TV
ƔInsert or remove straightly and completely.
2Start Media Player
MEDIA
PLAYER
3Select the mode
Contents Select |
|
|
|
EXIT |
|
|
|
Select |
|
|
|
RETURN |
|
|
|
Access | Photo | Music | Movie |
USB |
|
|
|
[Photo]: Displays the thumbnail of all photos in the USB device.
[Music]: Displays the thumbnail of music folders in the USB device.
[Movie]: Displays the thumbnail of video titles in the USB device.
[Contents Select]
Switching between modes
When you are in the thumbnail view of any mode, you change to the other mode by returning to the [Contents Select] screen.
B
Photo mode
Media Player | Photo | All photos | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
View | EXIT | Info | USB |
Select | RETURN | Option Menu |
|
Slideshow | View Select | Drive Select | Contents Select |
Operation guide
: Error display
Follow the operation guide to perform available operations in Photo mode.
To display / hide the operation guide during | INFO |
| |
[Single View] and [Slideshow] |
|
[View]
Enters Single view mode to view photo one at a time
[Slideshow]
Lets you view all photos in the slideshow mode
[View Select]
Lets you toggle between thumbnail view and folder view.
[Option Menu]
Contains [Slideshow Settings] menus to set up slideshow.
Ŷ[Transition Effect]
Effect for photo switching during slideshow
[None] / [Dissolve] / [Wipe right] / [Wipe left] / [Wipe up] / [Wipe down] / [Box out] / [Random]
Ŷ[Screen Mode]
Screen mode for Single view and Slideshow
[Normal] / [Zoom]
–Depending on the photo size, it may not be fully enlarged to ¿ll the screen, e.g. portrait style picture.
Ŷ[Interval]
Slideshow interval [5] / [10] / [15] / [30] / [60] / [90] /
[120](seconds)
Ŷ[Repeat]
Slideshow repeat [Off] / [On]
Ŷ[Back Ground Music]
Background music during photo viewing
[Off] / [Type 1] / [Type 2] / [Type 3] Note
ƔPicture quality may suffer depending on the slideshow settings.
ƔPicture setting may not work depending on the slideshow settings.
Music mode
Media Player | Music | Folder view |
My Music_1 My Music_2 | My Music_3 |
|
Access | EXIT | Info | USB |
Select | RETURN | Option Menu |
|
Play Folder |
| Drive Select | Contents Select |
Operation guide
Follow the operation guide to perform available operations in Music mode.
To display / hide the operation guide during | INFO |
| |
playback |
|
To playback all music in the selected folder |
|
R |
|
To playback the selected file only
Select the folder | Select the file | Play |
R
OK | OK |
[Option Menu]
Contains [Music Setup Menu] to set up play mode.
Ŷ[Repeat]
[Off]: Playback repeat off
[One]: Playback repeat on the selected one file
[Folder]: Playback repeat within the selected folder
Movie mode
Media Player | Movie | Title view |
Trip1 | Trip2 | Trip3 | Trip4 | Trip5 | Room | Nature1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Nature2 |
| Nature3 |
| Nature4 | Nature5 |
| Nature6 | 2010_4 |
| 2010_7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2010_9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Access | EXIT |
| Info |
|
| USB | ||||
|
| Select | RETURN | OPTION | Option Menu |
|
|
| ||||
| Play Folder |
|
|
| Drive Select |
| Contents Select | |||||
Operation guide
: Error display
Follow the operation guide to perform available operations in Movie mode.
To display / hide the operation guide and | INFO | ||||
| |||||
information banner during playback |
| ||||
To playback all movies in the selected title folder | |||||
R |
|
| |||
To playback the selected file in the title folder | |||||
Select the title | Select the file | Play | |||
|
|
|
| R | |
OK | OK | ||||
| |||||
[Option Menu]
Contains [Video Setup Menu] to set up Movie mode. While in thumbnail view:
Ŷ[Repeat]
Playback repeat within the title [Off] / [On]
–Only the selected folder will be repeated.
During movie playback:
Ŷ[Multi Audio]
Selects the sound tracks (if available)
Ŷ[Subtitle]
Selects the subtitle (if available)
[Off] / [Subtitle1] (/ [Subtitle2] ...)
Ŷ[Aspect Change]
[16:9] / [14:9] / [Just] / [4:3] / [4:3 Full] / [Zoom1] / [Zoom2] / [Zoom3]
–You can also change the aspect using the ASPECT button.
Using the Menu
Functions
1Display the menu
MENU
2Select the menu
Main Menu
Picture
OK
Sound
Setup
3Select the item you want, then change / adjust or access
Example:
Picture Menu |
| 1/2 |
|
Viewing Mode | Dynamic |
| Select |
Backlight |
| 100 | |
| OK | ||
Contrast |
| 50 | |
|
| ||
Brightness |
| 0 |
|
Colour |
| 50 |
|
ƔChange the setting option
Viewing Mode | Dynamic |
| Change / |
ƔAdjust the intensity bar | OK | ||
| adjust | ||
Contrast |
| 50 | |
|
| ||
ƔAccess the submenu |
|
| |
Child Lock | Access | OK |
|
| Access | ||
|
|
| |
Note
ƔA different menu will be displayed in the mode of Media Player (p. 8 - 9).
ƔOnly available items can be selected.
Picture Menu
[Viewing Mode]
Sets preset picture mode for each input. [Dynamic]: Improves contrast and sharpness. [Normal]: For viewing in a normal lighting condition. [Cinema]: Improves the performance of contrast, black and colour reproduction.
[True Cinema]: Reproduces the original image quality precisely without any revision.
[Game]: For viewing when playing games
–Not valid on TV mode.
–To display a continuous record of time spent using Game mode 
[Playing Time Display] (p. 11).
In each Viewing Mode, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Eco Mode],
[Backlight] / [Contrast] / [Brightness] / [Colour] /
[Sharpness]
Adjusts the levels of these options to your preference.
[Tint]
Adjusts the picture hue.
ƔFor NTSC signal, Component or HDMI input
[Colour Balance]
Sets the overall colour tone of the picture.
[Cool] / [Normal] / [Warm]
ƔNot valid when [Viewing Mode] is set to [True Cinema]
[Channel Colour Set]
Adjusts the suitable colour density from 3 levels for each channel.
ƔSelect the channel to adjust and set this function.
[Eco Mode]
Automatic Brightness Control function
Adjusts picture settings automatically depending on ambient lighting conditions [Off] / [On]
Reduces unwanted picture noise and flicker noise in the contoured parts of a picture [Off] / [Min] / [Mid] / [Max]
Makes still or slow moving pictures more vivid [Off] / [On]
ƔOccasionally, while viewing still or slow moving pictures, colour patterning may be seen. Set to [On] to display sharper and more accurate colours.
ƔFor PAL or NTSC signal reception only.
ƔNot valid on Component, HDMI and Media Player.
[Reset to Defaults]
Press OK to reset the present picture [Viewing Mode] of the selected input to the default settings.
Sound Menu
[Mode]
Sets preset sound mode. The selected mode affects all input signals.
[Music]: Improves sound quality for watching music videos, etc.
[Speech]: Improves sound quality for watching news, drama, etc.
[User]: Adjusts the sounds manually by using the equaliser
–For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and [Treble]. Select [Equaliser] and adjust the frequency 
(below).
In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those settings will be stored for each mode.
[Bass] / [Treble]
Adjusts the effect to your preference.
[Equaliser]
Select the frequency and change the frequency level by using the cursor buttons.
ƔThis function is available when [Mode] is set to [User].
ƔTo enhance the bass sound, raise the level of the lower frequency. To enhance the treble sound, raise the level of the higher frequency.
ƔTo reset the levels of each frequency to the default settings, select [Reset to Defaults] by using the cursor button, and then press the OK button.
[Balance]
Adjusts volume level of right and left speakers
[Surround]
Surround sound settings [Off] / [On]
[Auto Gain Control]
Automatically regulates large sound level differences between channels and inputs [Off] / [On]
[Volume Correction]
Adjusts the volume of individual channel or input mode
[Speaker Distance to Wall]
Compensates for the low frequency sound due to the distance between the speakers and the wall [Up to 30cm] / [Over 30cm]
ƔIf the back space between the TV and wall is over 30 cm, [Over 30cm] is recommended.
ƔIf the back space between the TV and wall is within 30 cm, [Up to 30cm] is recommended.
[MPX]
Selects multiplex sound mode (if available) [Stereo]: Use this normally
[Mono]: When stereo signal cannot be received
[M1] / [M2]: Available while mono signal is transmitted
[HDMI1/2 Input]
Selects to fit the input signal (p. 12)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the
ƔFor HDMI input
[Reset to Defaults]
Press OK to reset the present settings of [Mode], [Balance] and [Surround] to the default.
Setup Menu
[Off Timer]
Sets the time until the TV automatically goes to Standby mode [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
[Child Lock]
Locks channels / AV input modes
Enter the PIN number (4 digits) to access.
First setting:
On the [Child
Ŷ[Change PIN]
Lets you change your PIN number.
–Enter a new PIN number twice.
–Performing [Shipping Condition] erases the PIN number and all settings.
Ŷ[Child Lock List]
Displays the Child Lock List.
–From the list, selects the channel / input to be locked.
[Tuning Menu] 
(p. 11)
[OSD Language]
Changes language for 
(p. 6)
[Display Settings]
Ŷ[Input Labels]
Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in [Input Selection] (p. 7) or banner
–To skip the input mode, select [Skip].
Ŷ[Banner Display Timeout]
Sets how long the Information banner stays on screen
(p. 6) [0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] /
[7]/ [8] / [9] / [10] (seconds)]
Ŷ[Playing Time Display]
Set to [On] to display a continuous record of time spent using Game mode every 30 minutes [Off] / [On]
–This function is available when [Viewing Mode] is set to [Game].
[System Menu]
Ŷ[Shipping Condition]
Resets all settings to the original condition.
–Access this function and follow the
–Initial Setup will automatically start after [Shipping Condition] completes 
(p. 6).
Ŷ[Software Licence]
Displays the software licence information of the TV.
Ŷ[System Information]
Displays the system information of the TV.
[Other Settings]
Ŷ[Colour System]
Selects optimum colour system based on video signals in AV mode [Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]
Ŷ[Colour Matrix]
Adjusts suitable colour parameters for [SD] (standard definition) or [HD] (high definition)
–[SD]: Input signal is a normal TV system
–[HD]: Input signal is a high de¿nition system
•Available only with 480p or 576p input on video signals in a natural colour from digital equipment connected to AV1 component or HDMI1 / HDMI2 terminals.
Ŷ[Auto Standby]
Sets the duration of time that the TV will remain on when no operation is performed [Off] / [2] / [4] (hours)
–Automatic input switching with the connected equipment affects this function and
–The noti¿cation message will appear 3 minutes before going into Standby mode.
Ŷ[Power Save]
Reduces brightness of picture to economise on power consumption [Off] / [On]
Ŷ[16:9 Overscan]
Selects the screen area displaying the image
–[On]: Enlarges the image to hide the edge of the image.
–[Off]: Displays the image in the original size.
•Set to [On] if noise is generated on the edge of the screen.
•This function is available when aspect is set to [16:9].
•This function can be memorised separately for SD (Standard definition) and HD (High definition) signals.
Using the [Tuning Menu]
[Tuning Menu] lets you retune your TV, skip unwanted channels, etc.
TV mode only
[Channel List Edit]
Hides unwanted channels. The hidden channels cannot be displayed except in this function.
Select a channel, then reveal / hide
Channel List Editor
: [reveal]
: [hide] (skip)
Ŷ[Tune]
Retunes each channel (Manual Tuning).
R
Channel List will be set to [Tune].
Ŷ[Reveal all]
Reveals all hidden channels.
Y
Channel List will be set to [Reveal all].
[Auto Tuning]
Scans and stores all channels automatically.
Auto Tuning
All tuning data will be erased
Start Auto Tuning | EXIT |
RETURN
ƔIf tuning has not been done completely
[Manual Tuning] (below)
[Manual Tuning]
Scans and stores channels manually.
Manual Tuning
1 |
|
|
| CH57 |
| |
Fine Tuning | 0% |
|
|
| 100% | |
Manual Tuning |
|
| ||||
|
| |||||
Sound System |
|
|
|
| ||
|
| B/G | ||||
Colour System |
|
| Auto |
| ||
1Set [Sound System] and [Colour System].
•Normally set [Colour System] to [Auto].
2Select a channel position to store the channel.
•If a VCR is connected only with the RF cable, select channel position [0].
3Start tuning.
•Tuning stops when a channel is found.
4Press OK to store the channel or press the cursor button to continue tuning.
Ŷ[Fine Tuning]
Refines the tuning of a channel.
8
9
10
11
Additional Information
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
ƔNo signal is received and no operation is performed for |
30 minutes in Analogue TV mode. |
Supported file format in Media Player
ŶPhoto
JPEG (.jpg, .jpeg)
– Supported image resolution: 8 × 8 to 30,719 × 17,279 |
– DCF and EXIF standards |
– |
– Progressive JPEG is not supported. |
USB Flash Memory
For playing back in Media Player Format: FAT16, FAT32 Compliance:
Supports only USB1.1 or USB2.0 standard. Maximum USB capacity supported is 16GB. USB Hub or card adapter is not supported.
Unusual image is displayed
ÎTurn the TV off with Mains power On / Off switch, then turn it on again. If the problem persists, initialise all settings 
[Shipping Condition] (p. 11)
Pictures from equipment connected via HDMI are unusual
Î Check the HDMI cable is connected properly. |
Î Turn the TV and equipment off, then turn them on |
Specifications
Model no.
AUDIO OUT
RCA PIN Type × 1, 0.5 V[rms]
Sound
Audio output
20 W (10 W + 10 W)
Receiving systems / Band name
Maintenance
First, remove the mains plug from the socket outlet.
Regular care
ƔGently wipe the surface of the display panel, cabinet and |
pedestal by using a soft cloth. |
HDMI, the HDMI Logo, and
Manufactured under license from Dolby Laboratories. Dolby and
Ɣ[Off Timer] is active in the Setup Menu. |
ƔNo operation is performed for the period selected in [Auto |
Standby] (p. 11). |
Aspect
Ŷ[16:9]
Directly displays the image at 16:9 without distortion (anamorphic).
Ŷ[14:9]
Displays the image at the standard 14:9 without distortion.
Ŷ[Just]
Displays a 4:3 image
Ŷ[4:3]
Displays the image at the standard 4:3
Ŷ Music |
MP3 (.mp3) / AAC (.m4a)/ WMA (.wma)/ FLAC (.flac) / WAV (.wav)
ŶVideo
AVI (.avi) / MKV (.mkv)/ASF (.asf, .wmv) /
MP4 (.mp4, .m4v) / FLV (.flv) / 3GPP (.3gp, .3g2) / TS (.ts) / PS (.vob, .vro) / RMVB
WMA Pro and WMA Lossless are not supported.
RMVB files are only supported by A408K, A409K, A400K and A410K/M series.
Note
ƔEven if these conditions are fulfilled, some files may not be played back depending on how they are encoded.
ƔDo not use
ƔThe device may become unusable with this TV if the file or folder names are changed.
Note
ƔData modified with a PC may not be displayed. |
ƔDo not remove the device while the TV is accessing data. |
Otherwise this can damage the device or TV. |
ƔDo not touch the pins on the device. |
ƔInsert the device in the correct direction. Otherwise this |
can damage device or TV. |
ƔElectrical interference, static electricity, or erroneous |
operation may damage the data or device. Panasonic is |
not liable for any deterioration or damage of data or device |
during operations with the TV. |
ƔIt is recommended to connect the USB Flash Memory |
directly to the TV’s USB port. |
ƔSome USB devices or USB HUB may not be used with |
this TV. |
ƔYou cannot connect any devices by using USB card |
reader. |
ƔAdditional information for USB devices may be on the |
following website. (English only) |
http://panasonic.jp/support/global/cs/tv/ |
again. |
Î Check an input signal from the equipment (p. 12). |
Î Use equipment compliant with |
Sound
No sound is produced
ÎCheck the sound mute setting (p. 6) and volume.
Low level or distorted sound
ÎSound signal reception may be deteriorated.
ÎSet [MPX] (p. 10) in the Sound Menu to [Mono].
Sound output via HDMI connection is unusual
ÎSet the sound setting of the connected equipment to “2ch L.PCM”.
ÎCheck the [HDMI1 / 2 Input] setting in the Sound Menu (p. 10).
ÎIf digital sound connection has a problem, select analogue sound connection (p. 12).
Power source
A400G/K, A408K, A409K, A410G/K series:
AC 220 - 240 V, 50/60 Hz
A400X, A410M/X series:
AC Auto 110 - 240V, 50/60 Hz
Power consumption (Rated power / Standby power)
A400G/K, A408K, A409K, A410G/K series: 57 W / 0.35 W
A400X, A410M/X series: 58 W / 0.35 W
Display panel
Panel
TFT LCD Module with LED Backlight
Visible screen size (diagonal)
80 cm
17Systems Systems
1PAL B, G, H
2PAL I
3PAL D, K
4SECAM B, G
5SECAM D, K
6SECAM K1
7NTSC M
(NTSC 3.58/4.5 MHz)
8NTSC 4.43/5.5 MHz
9NTSC 4.43/6.0 MHz
10 NTSC 4.43/6.5 MHz
11NTSC 3.58/5.5 MHz
12 NTSC 3.58/6.0 MHz
13 NTSC 3.58/6.5 MHz
14 SECAM I
15PAL 60 Hz/5.5 MHz
16PAL 60 Hz/6.0 MHz
17PAL 60 Hz/6.5 MHz
Function
Reception of broadcast transmissions and Playback from Video Cassette Tape Recorders
Playback from Special VCR’s or DVD
Playback from Special Disc Players and Special VCR’s or DVD
ƔWipe the mains plug with a dry cloth at regular intervals. |
Moisture and dust may lead to fire or electrical shock. |
For stubborn dirt
First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture.
Caution
ƔDo not use a hard cloth or rub the surface too hard as |
this could scratch the surface. |
ƔDo not subject the TV’s surfaces to water or detergent. |
Liquid inside the TV could lead to product failure. |
ƔDo not subject the surfaces to insect repellent, solvent, |
thinner or other volatile substances. This may degrade |
surface quality or cause peeling of the paint. |
ƔThe surface of the display panel is specially treated and |
may be easily damaged. Take care not to tap or scratch |
the surface with your fingernail or other hard objects. |
the
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
RealMedia, RealVideo and RealAudio are trademarks or registered trademarks of
without distortion.
Ŷ[4:3 Full]
Displays a 4:3 image enlarged horizontally to fit the screen.
ƔHD signal only
Ŷ [Zoom1]
Displays a 16:9 letterbox or 4:3 image without distortion.
Ŷ[Zoom2]
Displays a 16:9 letterbox (anamorphic) image
Ŷ[Zoom3]
Displays a 2.35:1 letterbox (anamorphic) image
At 16:9, displays the image at its maximum (with slight enlargement).
Input signal that can be displayed
Signal name | COMPONENT HDMI |
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
Mark : Applicable input signal
ƔSignals other than above may not be displayed properly.
ƔThe above signals are reformatted for optimal viewing on your display.
HDMI connection
This TV incorporates HDMI™ technology. HDMI (high- definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non- compression standard.
HDMI allows you to enjoy
ŶApplicable HDMI features
ƔInput audio signal:
2ch Linear PCM (sampling frequencies - 48 kHz,
44.1kHz, 32 kHz)
ƔInput video signal:
“Input signal that can be displayed” (p. 12) Match the output setting of the digital equipment.
ŶDVI connection
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable. When the DVI to HDMI adaptor cable is used, connect the audio cable to the audio input terminal as follows:
ƔA410M/X only: use AV1 IN AUDIO terminals
ƔOther models: use AV IN AUDIO terminals
Note
ƔAudio settings can be made on [HDMI1 / 2 Input] in the Sound Menu (p. 10).
ƔThese HDMI connectors are “type A”.
ƔThese HDMI connectors are compatible with HDCP
ƔEquipment having no digital output terminal may be connected to the input terminal of component or video to receive analogue signals.
Troubleshooting
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If an error message appears, follow the message’s instructions.
If the problem still persists, please contact your local Panasonic dealer for assistance.
Screen
Red, blue, green or black spots on the screen
ÎThis is the characteristic of liquid crystal panels. The liquid crystal panel is built with very high precision technology. Occasionally, a few
Chaotic image, noisy
ÎSet
ÎCheck nearby electrical products (car, motorcycle, fluorescent lamp).
No image is displayed
ÎCheck the settings of [Contrast], [Brightness] or [Colour] in the Picture Menu (p. 9).
ÎCheck the TV is in AV mode. If the TV is in AV mode, check the selected input mode match the output of the external equipment (p. 7).
Blurry or distorted image
(no sound or low volume)
ÎResets channels 
[Auto Tuning] or [Manual Tuning] (p. 11)
General
The TV goes into Standby mode
ÎThis TV is equipped with auto power standby function (p. 12)
The remote control does not work or is intermittent
ÎReplace the batteries (p. 4).
ÎPoint the remote control directly at the remote control signal receiver of the TV (within about 7 m and 30 degree angle).
ÎSituate the TV away from sunshine or block sources of bright light from shining on the remote control signal receiver of the TV.
Parts of the TV become hot
ÎEven if the temperature of parts of the front, top and rear panels has risen, these temperature rises do not cause any problems in terms of performance or quality.
The LCD panel moves slightly when it is pushed with a finger
Clattered sound might be heard
ÎThere is some flexibility around the panel to prevent damage. This is not a malfunction.
Overcurrent error message appears
ÎThe connected USB device might cause this error. Remove the device and turn the TV off with Mains power On / Off switch, then turn it on again.
ÎCheck foreign objects are not inside the USB port.
Display resolution
1,366 (W) × 768 (H)
Dimensions (W × H × D)
A400, A408, A409 series:
734 mm × 477 mm × 184 mm (With Pedestal) 734 mm × 437 mm × 69 mm (TV only)
A410 series:
734 mm × 502 mm × 184 mm (With Pedestal) 734 mm × 437 mm × 69 mm (TV only)
Mass
5.5
(With Pedestal)
5.0
(TV only)
Connection terminals
AV IN / AV1 IN (COMPONENT / VIDEO) VIDEO
RCA PIN Type × 1, 1.0
AUDIO L - R
RCA PIN Type × 2, 0.5 V[rms]
Y
1.0
PB, PR
±0.35
AV2 IN (A410M/X only)
VIDEO
RCA PIN Type × 1, 1.0
AUDIO L - R
RCA PIN Type × 2, 0.5 V[rms]
HDMI 1 / 2* input
TYPE A Connectors
USB
USB 2.0 TYPE A Connectors
DC 5 V, Max. 500 mA
Receiving channels
VHF BAND
UHF BAND
CATV
Aerial input
VHF / UHF
Operating conditions
Temperature
0 °C - 40 °C
Humidity
20 % - 80 % RH
Note
ƔDesign and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
* HDMI 2 input is available for A410 series only.
ƔDo not allow the cabinet and pedestal to make contact |
with a rubber or PVC substance for a long time. This may |
degrade surface quality. |
Licence
This product incorporates the following software:
(1)the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),
(2)the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or
(3)open sourced software other than the software licensed under the GPL and/or LGPL.
The software categorized as (1) - (3) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the “Software License” menu on this product.
At least three (3) years from delivery of this product, Panasonic Corporation will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete
Contact Information: cdrequest@unipf.jp
The source code and the copyright notice are also available for free in our website below.
http://www.unipf.jp/dl/ATV13AR/
RealNetworks, Inc.
These statements are under the Licence Agreement with RealNetworks, Inc.
4.4.2.1Terms of use must prohibit the user from modifying, translating, reverse engineering, decompiling, disassembling or using other means to discover the Source Code or otherwise replicate the functionality of the Client Code, except to the extent that this restriction is expressly prohibited by applicable law.
4.4.2.2Terms of use must effectively disclaim on behalf of Real all warranties and conditions other than those set forth in this Agreement, express and implied, including implied warranties or conditions of merchantability and fitness for a particular purpose; and effectively exclude all liability for indirect, special, incidental and consequential damages, including but not limited to lost profits or replacement systems.
(Only supported by A408K, A409K, A400K and A410K/M series)
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
12 |
|
|
| 13 |
|
|
| 14 |
|
|
| 15 |
|
|
|
|
|
|