Safety Precautions

Operating Instructions

LED TV

Safety Precautions ··················· 2 Setting Up the TV ····················· 3 Connecting the TV···················· 4 Initial Setup····························· 6

Model No.

TH-32A400G TH-32A410G TH-32A400K TH-32A410K TH-32A400X TH-32A410M TH-32A408K TH-32A410X TH-32A409K

To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below:

ŶMains plug and lead Warning

If you detect anything unusual, immediately remove the mains plug.

ƔMains plug types vary between countries.

ƔThis TV is designed to operate on:

–A400G/K, A408K, A409K, A410G/K series: AC 220 - 240 V, 50/60 Hz

–A400X, A410M/X series:

AC Auto 110 - 240V, 50/60 Hz

ƔInsert the mains plug fully into the socket outlet.

ƔEnsure that the mains plug is easily accessible.

ƔDisconnect the mains plug when cleaning the TV.

ƔDo not touch the mains plug with wet hands.

ƔDo not damage the mains lead.

•Do not place a heavy object on

the lead.

• Do not place the lead near a high temperature object.

ƔDo not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base.

ƔThis TV is designed for table-top use.

ƔDo not expose the TV to direct sunlight and other sources of heat.

To prevent the spread of fire, keep candles or other open flames away from this product at all times

ŶDangerous part / Small object

Warning

ƔThis product contains possibly dangerous parts such as plastic bags, that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children.

ŶPedestal

Warning

ƔDo not disassemble or modify the pedestal.

Caution

ƔDo not use any pedestal other than the one provided with

this TV.

ŶMoving the TV

Caution

Before moving the TV, disconnect all cables.

ŶWhen not in use for a long time

Caution

This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet.

ƔRemove the mains plug from the wall socket when the TV is not in use for a prolonged period of time.

ŶUse conditions

Caution

ƔThis appliance is intended for use in tropical climates.

Ŷ Battery for the Remote Control

Caution

ƔIncorrect installation may cause battery leakage, corrosion and explosion.

ƔReplace only with the same or equivalent type.

ƔDo not mix old and new batteries.

ƔDo not mix different battery types (such as alkaline and manganese batteries).

ƔDo not use rechargeable batteries (Ni-Cd, etc.).

ƔDo not burn or break up batteries.

ƔDo not expose batteries to excessive heat such as sunshine, fire or the like.

ƔMake sure you dispose of batteries correctly.

Pedestal

ƔAssembly screws × 3

(M4 × 15) × 4

ƔBracketƔBase

Attaching the pedestal

1Assemble the pedestal

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1	Remove the assembly screws	from the TV.
2	Pull out the pedestal from the TV.
3	Remove the assembly screws	from the bracket.

Inserting remote’s batteries

Press the hook and lift the cover

Note the correct polarity (+ or -)

Optional accessories

Wall-hanging bracket (not supplied)

Please contact your local Panasonic dealer to purchase the recommended optional accessories.

Rear of the TV		(View from the side)
		(View from the side)
a		Depth of
		Depth of
	b	screw
	b

Connecting the TV

ƔExternal equipment and cables shown are not supplied with this TV.

ƔEnsure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

ƔCheck the type of terminals and cable plugs are correct when connecting.

ƔWhen using an HDMI cable, use the fully wired one.

ƔKeep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

ƔAlso read the manual of the equipment being connected.

Terminals

Rear of the TV

Operating the TV······················ 6

Watching External Inputs ··········· 7

Using the Media Player ············· 8

Using the Menu Functions·········· 9

Additional Information ············· 12

Troubleshooting ····················· 13

Specifications ························ 14

Maintenance ························· 15

Licence ································ 15

English

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before operating this product and retain them for future reference.

The images shown in this manual are for illustrative purposes only.

Some illustrations are presented as conceptual images and may be different from the actual products.

Illustrations shown may be different between models and countries.

The illustrations for A410 series is used in this manual unless otherwise mentioned.

Transport only in upright position

CLU

TQB4GC1180

•Do not pull on the lead. Hold

onto the mains plug body when disconnecting the plug.

•Do not move the TV with the lead plugged into a socket outlet.

•Do not twist the lead, bend it excessively or stretch it.

•Do not use a damaged mains plug or socket outlet.

•Ensure the TV does not crush the mains lead.

ƔDo not use any mains lead other than that provided with this TV.

ŶTake care

Warning

ƔDo not remove covers and never modify the TV yourself as live parts are accessible when they are removed. There are no user serviceable parts inside.

ƔDo not expose the TV to rain or

excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

ƔDo not insert foreign objects into the TV through the air vents.

ƔDo not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets.

ƔDo not apply strong force or impact to the display panel.

ƔDo not use the pedestal if it becomes warped or physically

damaged. If this occurs, contact your nearest Panasonic

dealer immediately.

ƔDuring setup, make sure that all screws are securely

tightened.

ƔEnsure that the TV does not suffer any impact during

installation of the pedestal.

ƔEnsure that children do not climb onto the pedestal.

ƔInstall or remove the TV from the pedestal with at least two

people.

ƔInstall or remove the TV by the specified procedure.

ŶVentilation

Caution

Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components.

Minimum distance (cm)

	10
10	10	10

ƔVentilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains.

ƔWhether you are using a pedestal or not, always ensure the vents at the bottom of the TV are not blocked and there is sufficient space to enable adequate ventilation.

Setting Up the TV

Standard accessories

Accessories may not be placed all together. Take care not to throw them away unintentionally.

Remote Control

ƔN2QAYB000823

Batteries (R6) × 2

(p. 4)

Mains Lead	(p. 5)
ƔOther series	ƔA410M series

2Attach the TV to the pedestal

Screw for fixing the TV onto the

wall-hanging bracket (not supplied)

ŶHoles for wall-hanging bracket installation

a:200 mm

b:200 mm

ŶScrew specification

Type: M4

Depth of screw:

Minimum: 9 mm

Maximum: 14 mm

Warning

ƔWhen optional accessories such as wall brackets etc. are used, always read and follow the manufactures installation and usage instructions.

ƔDo not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give off high heat. Doing so may warp or damage plastic cabinet parts.

ƔWhen installing wall brackets you must ensure the wall bracket is not electrically grounded to metal wall studs. Always ensure that there are no electrical cables, pipes etc. in the wall before you begin the wall bracket installation.

ƔTo prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.

1USB port

2A410M/X only: AV1 IN*

Other models: AV IN*

3HDMI 1

4A410 series only: HDMI 2

5AUDIO OUT

6A410M/X only: AV2 IN

7Aerial terminal

Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral devices.

The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content.

Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf. It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights in the content you wish to record or playback.

Panasonic and its affiliates make no representations or warranties of any kind with respect to the USB devices and the performance of communication between the USB devices and the USB port of Panasonic products, and expressly disclaims any and all warranties, whether express or implied or otherwise, including without limitation any implied warranty of fitness for a particular purpose, any loss of data, and any implied warranties arising from course of dealing or course of performance of data communication between the USB devices and the USB port of Panasonic products.

This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from

MPEG LA, LLC.

See http://www.mpegla.com.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Customer’s Record

The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in

the event of theft or loss, and for Warranty Service purposes.

Model Number

Serial Number

Connections

Aerial and mains lead

Aerial

RF cable

Mains lead (supplied)

DVD Recorder /

VCR

Alternative connection

Insert the mains plug firmly into place.

ƔWhen disconnecting the mains

lead, be absolutely sure to disconnect the mains plug at the socket outlet first.

ƔKeep the space between the TV and RF cable to prevent distorted image.

ƔDo not put the RF cable close to the mains lead to avoid noise.

ƔDo not place the RF cable under the TV.

ƔAn aerial, correct cable (75 ȍ coaxial) and correct terminating plug are required to obtain optimum quality picture and sound.

ƔIf a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial socket and the TV.

ƔYour local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your particular area and the accessories required.

ƔAny matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the customer.

ƔIf the aerial is placed in the wrong location, interference might happen.

Set top box

Satellite dish

Set top box

HDMI cable

AV / Game equipment

ŶUsing HDMI terminal

HDMI cable	Equipment

ƔYou can also make similar connection via HDMI 2.

Ŷ Using COMPONENT terminals

Equipment	TV
Equipment
Component video cable

Audio cable

*A410M/X only: AV1 IN

Other models: AV IN

ŶUsing COMPOSITE terminals

Equipment	TV
Equipment
	Video cable

Audio cable

* A410M/X only: AV1 IN Other models: AV IN

ƔA410M/X only:

You can also make similar connection via AV2 IN.

Speaker system

Initial Setup

When you first turn on the TV, a series of steps will pop-up to guide you to setup your TV.

ƔThese steps are not necessary if the setup has been completed by your local dealer.

1Plug the mains plug into the socket outlet, then switch on the TV

A400G/K, A408K, A409K, A410G/K series:

AC 220 - 240 V, 50/60 Hz

A400X, A410M/X series:

AC Auto 110 - 240V, 50/60 Hz

2Select your language

OSD Language	Select
English	OK

Store

3Select your area

	Channel Plan	Select
	Asia/W.Europe	OK
	CIS/E.Europe	Confirm
	China	Confirm
	China
	Hong Kong
	NZ/Indonesia
	CATV/Other

When selecting [CATV/Other], press OK, and then select the Channel Plan from [Indian CATV], [South Africa], [American System], [American CATV] or [Japan].

4Auto Tuning starts

ƔAuto Tuning searches and stores TV channels. The sorted channel order depends on the TV signal, the broadcasting system and reception conditions.

5Select [Home]

Please select your viewing environment.

Home	Shop	OK	Change
			Confirm

Ɣ[Shop] is for shop display. If you selected [Shop], you can return to the above screen at the stage of Shop confirmation screen.

Shop

RETURN

You have selected shop mode

ƔTo change the viewing environment later on, you need to initialise all settings by accessing [Shipping Condition] (p. 11).

Setup is now complete and your TV is ready for viewing.

Operating the TV

Using the remote control

	POWER MEDIA				INPUT
1			PLAYER		INPUT			13
1								13
2		MENU PICTURE				OFF TIMER		14
3		MENU PICTURE				OFF TIMER
3
4			INFO				EXIT	15
5								16
5								16
6
				OK				17
	OPTION			OK		RETURN		17
7	OPTION					RETURN		18

			R G		Y		B
8			R G		Y		B
8				ASPECT				19
				ASPECT				19
9			VOL	MUTE		CH		20
9			VOL			CH		20

10
11
11
12			STILL					21
12			STILL			LAST VIEW		21
						LAST VIEW

1	Switches the TV On / Standby
2	MEDIA PLAYER (p. 8)
3	Displays [Main Menu]	(p. 9)
4	Selects picture mode	[Viewing Mode] (p. 9)
	ƔPress repeatedly to select.
5	Displays Information banner
6	OK
	ƔConfirms selections.
	ƔPress after selecting channel positions to quickly
	change channel.
7	Displays [Option Menu]
	ƔShortcuts to some setting menus for picture, sound,
	etc.
	ƔFollow the operation guide to select / change the
	settings.
8	Coloured buttons
	ƔPerforms multiple operations which correspond to
	the operation guide displayed on the menu screen.
9	Volume Up / Down
10	Sound Mute On / Off
11	Numeric buttons
	ƔChanges channel.

13Input mode selection

ƔTV - switches to TV input mode

ƔAV - displays [Input Selection] screen (p. 7) or press repeatedly to select the AV input mode

14OFF TIMER

ƔPress repeatedly to select the period after which the TV will turn to Standby mode automatically.

[0]/ [15] / [30] / [45] / [60] / [75] / [90] (minutes)

15Changes multiplex sound mode (if available)

Sound mode indicator:
: STEREO				: MAIN I


: MONO				: SUB II

16Exits to the TV viewing screen

17Cursor buttons

ƔMakes selections or adjustments.

18Returns to the previous menu / page

19ASPECT

ƔDisplays the [Aspect Selection] screen. Follow the operation guide to select the mode.

[16:9] / [14:9] / [Just] / [4:3] / [4:3 Full] / [Zoom1] / [Zoom2] / [Zoom3] (p. 12)

ƔYou can also press the button repeatedly to select the mode.

20Channel Up / Down

21Returns to the last viewed channel

About operation guide

When operating the TV with the remote control, follow the operation guide available at the bottom of the screen to perform the operation you want.

Example: [Aspect Selection]

Aspect Selection

16:9

14:9 Just

Change	Select
	EXIT	Operation guide
	RETURN

Referring to the operation guide:

ƔTo select the mode

ƔTo change to the selected mode

ƔTo return to the previous menu

RETURN

ƔTo exit the menu

EXIT

Using the TV controls

		1
		2
Indicators on the TV		3
5	6 7	4

1Displays [Input Selection] screen

ƔOn first press, the [Input Selection] screen for control panel is displayed. Pressing the button again

will toggle cursor movement.

Displays [Main Menu] when press and hold for 3 seconds

Confirms selection (OK button) while in the menu system

2Channel Up / Down Cursor Up / Down

ƔMakes selections or adjustments when in the menu system

3Volume Up / Down Cursor Left / Right

ƔMakes selections or adjustments when in the menu system

4Switches TV On or Standby

ƔTo completely turn Off the TV, remove the mains plug from the wall socket.

5Remote control signal receiver

6C.A.T.S. (Contrast Automatic Tracking System) sensor

ƔSenses brightness to adjust picture quality when [Eco Mode] in the Picture Menu is set to [On].

(p. 10)

7Power LED

ƔRed: Standby

Green: On

Watching External Inputs

Connect the external equipment (p. 5), then select the input corresponds to the connected terminal.

Example:

Input Selection

AV1

HDMI1

HDMI2

USB

Note

F0114-0

Printed in Malaysia

Web Site: http://panasonic.net

Audio cable	Amplifier with
	Amplifier with
	speaker system

ƔWhen in Standby mode, switches TV On.

12 Freezes / unfreezes picture

Ɣ[USB] : Switches to Media Player (p. 8)

ƔYou can label or skip each input mode (except [USB]).

“Input Labels” (p. 11)

Skipped inputs will not be displayed when the AV button is pressed.

Panasonic TH-32A410M, TH-32A410X, TH-32A410K, TH-32A410G operating instructions Safety Precautions

Operating Instructions

Contents