Sharp PN-Y555, PN-Y475, PN-Y425 Mounting Precautions For SHARP dealers and service engineers

Mounting Precautions

(For SHARP dealers and service engineers)

•When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.

•Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

•This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation.

•This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

•To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the thickness of the mounting bracket.

•Do not use an impact driver.

•When moving the monitor, hold the parts marked by below. Do not hold the LCD panel. This may cause product damage, failure, or injury.

•After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

•Do not use any screw holes other than VESA holes for installation.

E48