Menu Items
nAUDIO
BASS
Adjusts the volume of
TREBLE
Adjusts the volume of
RESET
Resets the values of the AUDIO menu items to the factory preset values.
Select “ON” and then press ENTER.
nSETUP
DATE/TIME SETTING
Set the date and time. Press 
or 
to select the date and time, and press 
or 
to change the numerical values. Set the time on a
SCHEDULE (See page 30.)
You can turn the power on/off at a specified time.
Files in a USB flash drive can also be played at a specified time.
LANGUAGE
Sets the display language for the menu screen.
INPUT SELECT
HDMI
Select the input mode to be used in HDMI input terminals.
Select the input mode to be used in
AUDIO OPTION
AUDIO OUTPUT
Sets the volume of sound output from the audio output terminals.
SPEAKER
Select whether or not speakers are used.
LAN Setup
Configures the settings to control the monitor from the computer via LAN. (See page 38.)
ID SETTING
Assigns ID numbers to monitors connected in a daisy chain (see page 33), using the
If “0” is set, the system regards this as the state where no ID number is set.
MULTI
ENLARGE (See page 29.)
Sets whether or not to use the enlarge function.
ADVANCED (ENLARGE)
ENLARGE H / ENLARGE V
..........Sets the number of screen splits (number of monitors) in the horizontal/vertical direction used for the enlargement.
..........Specify the split screen to be displayed when the enlargement function is used. (See page 29.)
BEZEL ADJUST
..........When ENLARGE is set to ON, sets whether or not to use the frame correction function.
THERMAL SENSOR SETTING
Select the installation direction of the monitor.
LANDSCAPE | Landscape orientation | |
PORTRAIT | Portrait orientation | |
OPERATION MODE |
| |
MODE1 | OFF IF NO OPERATION is set to ON, and STANDBY MODE is set to LOW POWER. | |
| (These settings can not be changed.) | |
MODE2 | Will perform standard operation. OFF IF NO OPERATION is set to OFF, and STANDBY MODE is set to | |
| STANDARD. These settings can be changed. | |
