Sharp PN-Y555, PN-Y475, PN-Y425 operation manual nProduct Specifications

Specifications

nProduct Specifications

Model			PN-Y555	PN-Y475	PN-Y425
LCD component			55" Class [54-5/8 inch	47" Class [46-15/16 inch	42" Class [42 inch
			(138.8cm) diagonal]	(119.3cm) diagonal]	(106.7cm) diagonal]
			TFT LCD	TFT LCD	TFT LCD
Max. resolution		(pixels)	1920 x 1080
Max. colors			Approx. 1.06 billion colors
Pixel pitch			0.630 mm (H) ×	0.542 mm (H) ×	0.485 mm (H) ×
			0.630 mm (V)	0.542 mm (V)	0.485 mm (V)
Viewing angle			178° right/left/up/down (contrast ratio ≥ 10)
Screen active area		inch (mm)	47-5/8 (W) x 26-13/16 (H)	40-15/16 (W) x 23 (H)	36-5/8 (W) x 20-5/8 (H)
			(1209.6 x 680.4)	(1039.7 x 584.8)	(930.2 x 523.3)
Computer input signal			Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω]
Sync signal			Horizontal/vertical separate (TTL: positive/negative)
Video color system			NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play			VESA DDC2B
Power management			VESA DPMS, DVI DMPM
Input terminals	PC/AV		HDMI x 1
	PC		Mini D-sub 15 pin, 3 rows x 1
			DVI-D 24 pin (HDCP compatible) x 1
	Audio		3.5 mm mini stereo jack x 1
			RCA pin (L/R) x 1
	Serial (RS-232C)		D-sub 9 pin x 1
	USB flash drive		x 1
Output	PC		DVI-D 24 pin (HDCP compatible) x 1
terminals	Audio		RCA pin (L/R) x 1
	Serial (RS-232C)		D-sub 9 pin x 1
LAN terminal			10 BASE-T/100 BASE-TX
Speaker output			7 W + 7 W
Power requirement			AC 100 - 240 V, 1.7 A,	AC 100 - 240 V, 1.5 A,	AC 100 - 240 V, 1.4 A,
			50/60 Hz	50/60 Hz	50/60 Hz
Operating temperature *1			32°F to 104°F (0°C to 40°C)
Operating humidity			20% to 80% (no condensation)
Power consumption			150 W (16 W / 16 W)	135 W (16 W / 16 W)	120 W (16 W / 16 W)
(Input signal waiting mode / standby mode *2)
Dimensions (excluding protrusions)		inch (mm)	Approx. 49-3/16 (W) x	Approx. 42-3/8 (W) x	Approx. 38-1/8 (W) x
			2-5/8 (D) x 28-5/16 (H)	2-5/8 (D) x 24-1/2 (H)	2-5/8 (D) x 22-1/16 (H)
			(1249 x 66 x 719)	(1077 x 66 x 622)	(968 x 66 x 561)
Weight		lbs. (kg)	Approx. 55.2 (25.0)	Approx. 36.4 (16.5)	Approx. 32.0 (14.5)

*1 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments.

*2 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

E42