Linksys

SPA-1001

Telephony Features

One voice port (RJ-11) for analog phones or fax machines

Imedance agnostics – 8 Configurable settings

Call Waiting, cancel call waiting, call waiting Caller ID

Caller ID with Name/number (multi-national variants)

Caller ID blocking

Call forwarding:no answer,busy, all

Do not disturb

Call transfer

Message waiting indication – visual and tone based

Call return

Call back on busy

Call blocking with tol restriction

Delayed disconnect

distinctive Ringing – Calling and called number

Off-hook warning tone

Selective/Anonymous call rejection

Hot line and warm line calling

Speed dialling of 8 numbers/addresses

Music on hold

Package contents

SPA-1001 phone adapter unit

Power adapter

RJ-45 Ethernet cable

Quick installation guide

Specifications

Data networking

MAC address (IEEE 802.3)

Ipv4 – Internet protocol v 4 (RFC 791) upgradeable to v6 (RFC 1883)

ARP – address resolution protocol

DNS – A record (RFC 1706), SRV record (RFC 2782)

DHCP Client – Dynamic host configuration Protocol (RFC 2131)

ICMP - Internet control message protocol (RFC792)

TCP – Transmission control protocol (RFC

UDP – User Data Protocol (RFC768)

RTP - Real time protocol (RFC 1889) (RFC 1890)

RTCP – Real time control Protocol (RFC 1889)

DiffServ (RFC 2475), type of service – TOS (RFC 791/1349)

SNTP – Simple network time protocol (RFC 2030)

Voice gateway

SIPv2: Session initiation protocol v2 (RFC 3261, 3262, 3263, 3264), sip proxy redundancy – dynamic via DNS SRV, A records, re-registration with primary SIP proxy server

SIP support in network address translation networks – NAT (incl. STUN)

Secure (encrypted) calling via pre-standard implementation of secure RTP

Codec name assignment

Voice algiotherms

G.711 (A-law and u-law)

G.726 (16/24/32/40 kbps)

G.729 A

G.723.1 (63 kbps, 5.3 kbps)

Dynamic Payload

Adjustable audio frames per packet

Call Capability

Fax tone detection pass-through -using G.711

DTMF:In band and out of band (RFC 2833) (SIP Info)

Flexible dial plan support with inter digit times and Ip dialling

Call progress tone generation]

Jitter buffer – adaptive

Frame loss concealment

Full duplex audio

Echo cancellation (G.165/G.168)

VAD – Voice activity detection with silence suppression

Attenuation / Gain adjustments

Flash hook timer

MWI – Message waiting indicator tones

VMWI – via FSK

Polarity Control

Hook flash event signalling

Caller ID generation (Name and number) – Bellcore, DTMF, ETSI

Music on hold client

Streaming audio server – up to 10 sessions

Security

Password protected system reset to factory default

Password protected admin and user access authority

Provision/configuration/authentication:

HTTPS with factory installed client certificate

HTTP digest – Encrypted authentication via MD5 (RFC 1321)

Up to 256-bit AES Encryption

Provisioning, administration and maintenance

Web browser administration and configuration via integral web server

Telephone key pad configuration with interactive voice prompts

Automated provisioning and upgrade via HTTPS, HTTP, TFTP

Asynchronous notification of upgrade availability via NOTIFY

Non-intrusive, in-service upgrades

Report generation and event logging

Syslog and debug server recorded – per line configurable

Physical interface

1 10baseT RJ-45 Ethernet port (IEEE 802.3)

1 RJ-11 FXS Phone port– for analog circuit telephone device (tip/ring)

Interface circuit (SLIC)

Ring voltage:40-55 VRMS configurable

Ring frequency: 10 Hz – 40Hz

Ring waveform: Trapezoidal andsinusoidal

maximum ringer load: 3 REN

On-hook/off hook characteristics:

On-hook voltage (tip/ring):-50 V NOMINAL

Off-hook current: 25 mA min

Terminating imedance: 8 configurable settings including North America 600 ohms, European CTR21

Regulatory Compliance

FCC (part 15, class B), cUL, CE, IC-003, A-tick

Power supply

DC input voltage:+VDC at 2.0 A Max

Power consumption: 5 watts

Switching type (100-240v) Automatic

Power adapter: 100-240v50-60Hz (26-34VA) AC input, 1.8m cord

Indicator lights/LED

LAN Activity/Link LED- Green

Status LED (In-Use, Provisioning, Idle, Alert) - Amber

Documentation

Quick-Start installation and configuration guide

User guide

Dimensions

• 94mm x 63mm x 28mm

Unit weight

• 76.5g/ 2.7oz

Operating temp

• 32º to 113ºF (0º to 45ºC)

Storage Temp.

-77º to 158ºF (-25º to 45ºC)

Operating humidity

• 10 to 90% non condensing

Storage humidity

• 10 to 90% non condensing000

Page 2
Image 2
Linksys manual Linksys SPA-1001, Telephony Features, Specifications