10
English
Setting Up your DVD/VCR
Basic Connections
●Please refer to the instruction books of your
TV,VCR,Stereo System or other devices as
necessary to make the best connections.
●Make one of the following connections,
depending on the capabilities of your existing
equipment.
The following guidelines are options for the
best picture and sound quality available on
your DVD/VCR.
Picture
1Use SCART RGB Output (DVD/VCR(AV1
TV)) for best picture quality (for DVD fea-
tures).
2Use S-VIDEOOutput for the better picture
quality (for DVD features only).
3Use SCART Composite Output for good pic-
ture quality (for DVD and VCR features).
4If your TV only has a RF-style (Antenna IN or
75 ohm) input,use the RF OUT for connec-
tion and set your TV to channel 22 ~ 69 with
the same channel for DVD/VCR is set (for
DVD and VCR features).
Sound
1Digital audio connections provide the clearest
sound.Connect the DVD/VCR DIGITAL
AUDIO OUT (either COAXIAL or OPTI-
CAL) to your amplifier or receiver (for DVD
features only).
2Use SCART Output (DVD/VCR(AV1 TV)) for
better sound quality (for DVD and VCR fea-
tures).
If digital connections are not possible,connect
the DVD/VCR ANALOG AUDIO OUT(Left
and Right) to your amplifier,receiver,stereo or
TV (for DVD features only).
Warning!
– Never make or change connections with
the power switched on.
– Connect the DVD/VCR directly to your
TV,instead of eg. a VCR,to avoid distortion
because DVD video discs are copy protect-
ed.
– Do not connect the ANALOG AUDIO
OUT of DVD/VCR to PHONO IN of your
amplifier or receiver.
– If you use the Euro audio/video cable,it
is not necessary to connect the analog
audio cable.
Connecting to a TV
1Connect the antenna or cable to the AERIAL
of your DVD/VCR.
2Connect the DVD/VCR (AV1 TV) on the
DVD/VCR to the corresponding connector on
the TV.
Note:
– Ensure that the “TV”indication on
SCART cable is connected to the TV set
and “DVD”indication on SCART cable is
connected to the DVD/VCR.
If your TV is not equipped with a SCART
input, you can select the following connec-
tion:
If your TV has a S-Video input connec-
tor,
1Connect the antenna or cable to the AERIAL
of your DVD/VCR.
2Connect the S-Video out on the DVD/VCR to
the S-Video in on the TV.
3Connect the ANALOG AUDIO OUT on the
DVD/VCR to the Left and Right audio in on
the TV.
Note:
– You will still need the video cable or RF
coaxial cable for VCR features.
COAXIAL
S-VIDEO
OUT
DIGITAL
AUDIO OUT
ANALOG
AUDIO OUT
L
R
AERIAL
RF-OUT
VCR DVD/VCR
OPTICAL
DVD OUTPUT ONLY
AV2 (DECODER) AV1 (TV)

OR

ANTENNA IN