14
English
Setting Up your DVD/VCR
awill be displayed.
CH TUNING
AUTO
MANUAL
MOVE
awill be displayed.
MANUAL
POSITION P08
CHANNEL 008
DECODER [OFF]
SKIP [OFF]
●The tuner scans and memorizes all the active
channels in your area.After scanning,the
tuner stops on the lowest memorized chan-
nel.
6Press the P +/– buttons or numerical key
pads button to scan through channels you
have received.
Automatic Channel Setup
You can programme the tuner to scan only
the channels that you can receive in your
area.
1Turn on the TV and select the TV channel to
the video channel on the TV.
2Press the VCR button,then the MENU but-
ton.
3Press the PLAY Bor STOP Cbutton to
select INITIAL,then press the FF gbutton.
4Press the PLAY Bor STOP Cbutton to
select CH TUNING,then press the FF g
button.
5Press the PLAY Bor STOP Cbutton to
select AUTO,then press the FF g button.
Manual Channel Preset
1Press the VCR button,then the MENU but-
ton.
2Press the PLAY Bor STOP Cbutton to
select INITIAL,then press the FF gbutton.
3Press the PLAY Bor STOP Cbutton to
select CH TUNING,then press the FF g
button.
4Press the PLAY Bor STOP Cbutton to
select MANUAL,then press the FF gbut-
ton.
5Press the PLAY Bor STOP Cbutton to
select POSITION,then press the FF gbut-
ton.
●When a weak signal is received in Manual
Tuning mode,you can change the background
to solid blue or the static screen by pressing
the CLEAR button.
6Press the PLAY B,STOP Cbutton or
numerical key pads button to select your
desired position number,then press the FF
gbutton.
●You can select position number 01-99.
●If you want to remove scrambled signals,
press the PLAY Bor STOP Cbutton to
select DECODER.Then,press the FF g
button to select [ON].
7
Press the PLAY Bor STOP Cbutton to select
CHANNEL,then press the FF gbutton.
8Press the PLAY Bor STOP Cbutton.The
DVD/VCR tuner will begin to search up or
down automatically.When a channel is found,
the DVD/VCR will stop searching and the pic-
ture will appear on the TV Screen.
●You can select desired channel number by
using the number buttons.You must refer to
the channel plan and press three digits to
select the channel number.(To select channel
24,first press “0” button then press “2” and
“4”).
●If this is the channel you want,press the FF
gbutton.
9Press the MENU button to exit.
Note:
– To confirm that a channel has been
added,press the PROG +/– buttons.