Philips DVD740VR/001 manual Adding/Deleting Channels, Channel Reprogramming, Press the Menu button

Setting Up your DVD/VCR

Adding/Deleting Channels

1Press the VCR button, then the MENU but- ton.

2Press the PLAY B or STOP C button to select INITIAL, then press the FF g button.

3Press the PLAY B or STOP C button to select CH TUNING, then press the FF g button.

4Press the PLAY B or STOP C button to select MANUAL, then press the FF g but- ton.

5Press the PLAY B or STOP C button to select POSITION, then press the FF g but- ton.

6Press the PLAY B , STOP C button or numerical key pads button to select your desired position number, then press the FF g button.

7Press the PLAY B or STOP C button to select SKIP, then press the FF g button to select [ON].

●To memorize the channel again, press the FF g button. ON will change to OFF.

	MANUAL
	POSITION	P08
a	CHANNEL	008	will be displayed.
	DECODER	[OFF]
	SKIP	[ON]

8Press the MENU button to exit.

Channel Reprogramming

You can replace two channels.

1Press the VCR button, then the MENU but- ton.

2Press the PLAY B or STOP C button to select INITIAL, then press the FF g button.

3Press the PLAY B or STOP C button to select CH TUNING, then press the FF g button.

4Press the PLAY B or STOP C button to select MOVE, then press the FF g button.

5Press the PLAY B or STOP C button to select your desired position number, then press the FF g button.

●You cannot select a position number where “- -” appears next to the number.This is because SKIP is set to [ON] for this position number.

	MOVE
	P01:	01	P06:	06
	P02:	02	P07:	07
a	P03:	[03]	P08:	08	will be displayed.
	P04:	04	P09:	09
	P05:	05	P10:	10

Position Number

Channel Number

6Press the PLAY B or STOP C button until the channel move to another position num- ber, then press the FF g button.

	MOVE
	P01:	01	P06:	06
a	P02:	02	P07:	07	will be displayed.
	P03:	03	P08:	08
	P04:	04	P09:	09
	P05:	05	P10:	[10]

English

7Press the MENU button.

15