Panasonic ET5M series Auto Tuning, Plug the TV into mains socket and switch on, Select your area

Auto Tuning

Search and store TV channels automatically.

●These steps are not necessary if the setup has been completed by your local dealer.

●Please complete connections (p. 12 - 14) and settings (if necessary) of the connected equipment before starting Auto Tuning. For details of settings for the connected equipment, read the manual of the equipment.

1Plug the TV into mains socket and switch on

●Takes a few seconds to be displayed.

● If the red LED shows on the TV, press the Standby On / Off switch on the remote control.

2	Select your language	select
	OSD Language

English

set

Auto Tuning

3SelectCountry your country

Thailand	Vietnam
India	Malaysia
Singapore	Indonesia
United Arab Emirates	Saudi Arabia
Kuwait	Others

4 Select your area

Channel Plan

Asia/W.Europe

CIS/E.Europe

China

Hong Kong

NZ/Indonesia

CATV/Other

select set

select access

●When selecting [CATV/Other], press the OK button, and then select the Channel Plan from Indian CATV, South Africa, American System, American CATV or Japan CATV.

Auto Tuning starts

●Auto Tuning will start to search for TV channels and store them.

The stored channels and sorted channel order vary depending on the area, broadcasting system and conditions of signal reception.

Auto Tuning

2		CH 4
Scan	1	120

5 Setup the network connection

Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 18, 56).

●Please note that this TV does not support wireless public access points.

●Ensure the network connections (p. 14) and network environment are completed before starting setup.

Select the network type

Network Setup		[Wired]	“Wired connection” (p. 14)
		[Wireless]	“Wireless connection”
Select Wired or Wireless			(p. 14)
Wired Wireless	Set later

select

access

● To setup later on or skip this step

Select [Set later] or

15