Panasonic ET5M series, ET5T series, ET5K series manual Wireless connection settings

4 Select [Connection Test] and access to test

5

Connection Test Access

select access

●Performs automatic testing of the network connection for the TV. (It takes a while to test.)

Connection Test	: succeeded
Check network cable connection.
	The test is successful and the TV is connected to the network.
Check acquired IP address.
Check for devices using same IP address.	: failed
Check gateway connection.
Check server connection.	Check the settings and connections. And then try again.

Using
		Wireless connection settings
Network	This setting is for the wireless network connection.
	1 Select [Network Connection] and set to [Wireless]
	● Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the
		manual of the access point.
Services							select
		IP/DNS Settings
		Connection Test					access / store
		Network Connection		Wireless
(DLNA		Wireless Network Settings
		Network Link Settings
		Software Update
		New Software Message		On
		Network Status
/
VIERA	2 Select [Wireless Network Settings]
							select
Connect)		Connection Test
		Software Update		Wireless		displayed.
		Network Connection					access
		Wireless Network Settings		Access		● When the access point is already set, [Current Settings] screen will be
		IP/DNS Settings
		Network Link Settings
						To change the settings, select [No] on this screen and go to the next step.
		New Software Message		On
		Network Status
	3 Select your desired access point								● For the information of the
		Available Wireless Networks					select
	1		Access Point A	11n(2.4GHz)	Status					highlighted access point
		No.	Network Name(SSID)	Wireless type
							access
	2		Access Point B	11n(5GHz)
	3		Access Point C	11n(5GHz)		: Encrypted access point
		● To search access points			● To set [WPS(Push button)]			● To set manually		● To set [WPS(PIN)]
			again		(p. 17)			(p. 61)		(p. 61)
	4 Access the encryption key input mode
		Encryption Key Setting
		Connection will be made with the following settings:-
		Network Name(SSID) : Access Point A
		Authentication type : WPA-PSK				● If the selected access point is not encrypted, the confirmation screen will be
		Security type : TKIP
		Please input the encryption key.				displayed. It is recommended to select the encrypted access point.

Encryption key

6

■

E

■

Y F

●

N

A

S

60