SPEAKER CONNECTIONS (BRIDGED)
The EL amplifiers are capable of being bridged in a mono configuration. This feature allows you the flexibility of using the amplifier to drive a ** subwoofer or a center channel. In this configuration the amplifier sums the right and left channel to deliver one channel (mono) output.
Please note: in order for the amplifier to sum right and left signal information, both right and left RCA connections must be made.
**CAUTION! In the bridged mode, the amplifier must see a 4 Ohm load or higher. Any lower than 4 Ohms will cause the amplifier to overheat and possibly cause
|
|
| +12V | REM | GND | SPEAKERS |
AUX |
| AMP |
|
| AUX | |
7.5A | 20A | 20A | 20A |
| OUTPUT |
|
|
|
|
BRIDGED
+
4 Ohm Speaker
TWO CHANNEL BRIDGED SPEAKER CONNECTIONS
BRIDGED
CH 1 |
|
|
| CH 2 |
+ | - | + | - |
| + | CH 3 | - | + | - | |||||||
|
|
|
|
|
|
|
|
| CH 4 |
|
| |
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AUX | AUX |
|
| AMP |
| +12V | REM | GND | |
OUTPUT |
|
|
| |||||||
7.5A |
|
|
|
| ||||||
|
|
| 20A |
| 20A |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 Ohm Speaker | 4 Ohm Speaker |
FOUR CHANNEL BRIDGED SPEAKER CONNECTIONS
11