Panel Description
Front Panel
1 
2 
3
8 
9 
10
4 | 5 | 6 | 7 |
1.Power LED - Red LED will illuminate to display connected power supplies. M is main. B is back up.
2.Sync LED - Blue LED indicates it is receiving signal from the selected source.
3.Lock LED - When the function keys are locked the blue LED will illuminate
Lock - Press the Input button and hold for 5 seconds. All function keys will lock. Unlock - Press the Input button and hold for 5 seconds. All function keys will unlock.
4.Output LED - Blue LED will light up for each output connected and sending signal.
*Number of LEDs will vary by HDCAT device
5.Input Button - Press to manually switch between sources.
6.Auto Button - Press to activate or deactive the smart switching feature.
**This feature
7.EDID Button - Press to switch between internal and learned EDID™ options.
8.HDMI® LED - Blue LED will illuminate to indicate the current active input.
9.Auto LED - Blue LED will light up when the auto switching feature is enabled.
10.INT/Learn LED - Blue LED will illuminate to indicate EDID operational status (INT or Learn).
Back Panel
7
1
2
3
4
5 
6
1.Firmware port - Field serviceable USB port for updating firmware.
2.HDMI input - Connect HDMI sources here
3.
4.Local HDMI output - Local output for in room display, AVR or HDCAT cascading.
5.Back up power port - Connect second optional power supply
6.Main power port - Connect main power supply to this port.
7.CAT5e/6/7 Output - Connect to a receiver (purchased separately @ atlona.com) to pass signals over extended distances.
Ex. Optional receivers
atlona.com | 4 | Toll free: |
Local: | ||
|
|