US Amps AX owner manual NEVER, NEVER, Never, Limited Warranty

Page 20

NEVER, NEVER, NEVER!

NEVER USE A U.S.AMP WITH A GROUND LOOP ISOLATOR ON THE RCA’S OR AN ISOLATED INPUT SIGNAL. U.S.Amps are input-isolated at the factory and require an input ground for proper operation.

NEVER INSTALL OR MOUNT YOUR AMPLIFIER DIRECTLY TO A SPEAKER ENCLOSURE OR ANYWHERE ELSE WHERE SEVERE VIBRATION IS PRESENT. Protect your investment. Use Common sense. Make sure the spot you choose is well-ventilated and free from dirt and moisture.

NEVER USE YOUR U.S.AMP BELOW THE RATED MINIMUM IMPEDANCE. Remember, when you bridge your amplifier, each channel “sees” one half of the load, hence at 4 ohms bridged each channel is operating at 2 ohms. U.S.Amps makes the FAILURE TO OBSERVE THIS BASIC RULE WILL RESULT IN A SENSELESS WASTE OF POWER AND PERFORMANCE, and could damage your amplifier.

Limited Warranty:

U.S.Amps warrants all manufactured electronic products to be free from defects in material and workmanship for a period not to exceed TWO YEARS from the date of purchase.

IMPORTANT WARRANTY NOTICE: U.S.Amps will only warrant and service products displaying valid U.S.Amps serial numbers. WARRANTY SERVICE WILL ONLY BE PERFORMED WHEN THE UNIT IS ACCOMPANIED BY A COPY OF THE ORIGINAL SALES RECEIPT FROM AN AUTHORIZED DEALER. All product returned to U.S.Amps for service MUST be accompanied by a Return Authorization Number, issued by U.S.Amps in advance of shipment. The Return Authorization Number must be clearly and conspicu- ously displayed on the shipping carton or U.S.Amps will refuse delivery.

For Return Authorization Numbers, first call your U.S.Amps dealer you purchased the products from. The dealer will help you to obtain Return Authorization Numbers.

This warranty extends only to the original purchaser and is not transferable. Defective equipment must be returned within the warranty period, freight prepaid, to the U.S.Amps Factory or an Authorized U.S.Amps Warranty Station. This warranty covers only detects in materials and workmanship of manufactured electronic products(amplifiers).

Incidents of misuse, abuse, neglect, or unauthorized modification will not be covered within the terms of this warranty.

U.S.Amps reserves the right to refuse warranty service under such conditions.

U.S.AMPS WILL NOT BE RESPONSIBLE FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, RELATED TO THE USE OF THIS OR ANY OTHER PRODUCT BEARING OR SOLD UNDER THE U.S.AMPS BRAND NAME. USE THIS PRODUCT AT YOUR OWN RISK. IMPROPER USE OF THIS PRODUCT CAN RESULT IN PROPERTY DAMAGE, BODILY HARM, AND OR OTHER DAMAGE. U.S.AMPS ASSUMES NO RESPONSIBILITY FOR YOUR HEALTH OR SAFETY.

www.usamps.com

Image 20
Contents AX series Table of Contents Installation Did You Buy the Right U.S.Amp?Wire Gauge and Amperage Guide AmpsAmps Amps AWGChannel Amplifiers Controls and Features Low-pass Crossover 3-way SwitchLow-pass Crossover Control High-pass Crossover ControlAX-1000/2000 Channel AmplifiersAX-TU4360C Channel Amplifiers Controls and Features TU 4360C RBGAX-5600 Channel Amplifier Controls and Features 800860 Ohm StabilityAX-600DE Wiring Instructions for AX-TU600C/1000/2000 Power OutputWiring Instructions for AX-TU4360C Wiring Instructions for AX-5600 SubWiring Instructions for AX-600DE Special NoteWiring Instructions for AX-3200DE Amps Amplifier Power & Fuse AX-1000Factor Amps Amplifier SpecificationDamping Why Tubes? Tube In, Tube Out Vtcsd Vacuum Tube Current Sync DriveBenefis of Class DE VtcsdPage Limited Warranty NEVER, NEVER, Never