AX-5600
5-Channel Amplifier
Controls and Features
The 5-channel AX-5600 features a selectable 3-way electronic crossover with independent front and rear mid-high frequency adjustment, dual power supplies, 2 ohm per channel stability, and a Remote Bass Gain.
WARNING: NEVER use ground-loop isolation on the input of your U.S.Amp! It doesn’t need it!
1
| Sub | Sub | Band | Rear | Rear | Front | |
| Gain | XOver | Pass | HP | | Gain | Gain | |
L | | | | | | | | L |
| Min | 50 500 | 200 5K | | 50 500 | Max 50 500 | Max | |
| | RBG | Rear LP | | Rear HP | Front HP | |
| | XOver | | XOver | XOver | | Pwr |
R | AX-5600 | | | | R |
| | | | | | |
SUB Input Five Channel Amplifier | | U.S.A. | Rear | Front |
| | DE Sub Channel | | | Input | Input |
2
1Remote Bass Gain The AX-5600 comes with an optional “Remote Bass Gain” or “RBG” that can be mounted in the passenger compartment to independently attenuate the low pass output. The “BASS GAIN” located on the terminal endplate of the unit is used both to set the level at the low pass output and control the range of the RBG.
23-WAY Input allows the AX-5600 to accept input from modern 3-way head-units
allowing front to-rear fading of the mid-highs and Independent frequency and volume adjustment from the passenger compartment.
Protection AX-5600 is protected against thermal, over and under voltage and short circuit. The separate power supplies of AX-5600 are individually protected against over-current.
2 Ohm Stability
All 5 channels of the AX-5600 are stable to 2 ohms. The power of the mid-high channels increase 17% from 4 to 2 ohms while the subwoofer channel increases a whopping 43%!
Amp Power @ 4 Ohms | 800 |
75 W X 4 + 500 W X 1 @ 1Ω | Total Watts |
Amp Power @ 2 Ohms | 860 |
90 W X 4 + 500 W X 1 @ 1Ω | Total Watts |