Integra DSR-4.8 Connecting the DVD receiver, Connecting Antenna, Connecting the Speaker Cables

Page 18

Connecting the DVD receiver—Continued

Connecting the Speaker Cables

1

Strip about 5/8" (15 mm)

5/8" (15 mm)

 

of insulation from the

 

 

ends of the speaker

 

 

cables, and twist the bare

 

 

wires tightly, as shown.

 

2

Unscrew the terminal.

 

3

Fully insert the bare

 

 

wires.

 

Connecting Antenna

This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas.

The DVD receiver won’t pick up any radio signals with- out any antenna connected, so you must connect the antenna to use the tuner.

AM antenna push terminals

FM antenna connector

4 Screw the terminal tight.

The following illustration shows which speaker should be connected to each pair of terminals.

Front right

Front left

speaker

speaker

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting a Powered Subwoofer

Using a suitable cable, connect the DVD receiver’s SUB- WOOFER PRE OUT to an input on your powered sub- woofer, as shown.

Powered

subwoofer

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use only.

1Attach the FM antenna, as shown.

Insert the plug fully into the jack.

Once your DVD receiver is ready for use, you’ll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception.

2Use thumbtacks or something similar to fix the FM antenna into position.

Thumbtacks, etc.

Caution: Be careful that you don’t injure yourself when using thumbtacks.

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead (see page 19).

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DSR-4.8 Important Safety Instructions BatteriesPrecautions PowerInstalling this Unit FCC Information for User PrecautionsFor models having a power cord with a polarized plug Sur les modèles dont la fiche est polariséeSupplied Accessories Make sure you have the following accessoriesFeatures IntroductionContents Supported Discs IntroductionDisc Notes Function SupportAbout WMA Cleaning DiscsMP3/WMA/JPEG Compatibility Handling DiscsCopyright Before Using the DVD receiver Installing the BatteriesUsing the Remote Controller Front & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel Remote Controller Preset Buttons Resolution buttonTuner buttons Tuning / button Mode buttonConnecting the DVD receiver Connecting Your SpeakersPlacing the Speakers Connecting the Speaker Cables Connecting the DVD receiverConnecting Antenna Connecting a Powered SubwooferUsing a TV/FM Antenna Splitter Connecting the AM Loop AntennaConnecting an Outdoor FM Antenna Supplied indoor AM loop antenna is for indoor use onlyConnecting an Outdoor AM Antenna AV Cables & Connectors Video Output/Video Setting Matrix Video Signal Flow ChartRCA AV Connection Color Coding Basic SetupBefore Making Any Connections Optical Digital JacksUsing Component Video Connecting Your TV video connectionConnecting Other AV Component Compatibility of this unit with progressive-scan TVsConnecting an RI Dock Digital Audio ConnectionHdmi & the DVD receiver What is HDMI?Using Hdmi VideoUsing the Multiroom Control Kits Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components Connecting the Power/Turning on the DVD receiver Before connectingStandby/On Standby indicator Use the Up and Down Initial SetupFirst Time Setup Buttons to select TV ShapeHdmi and Progressive Settings Setting the HdmiSelecting Progressive or Interlaced Understanding Common Operations Adjusting the VolumeUsing Headphones Selecting the Input SourceRemote controller Press the Muting button Using the Sleep TimerAdjusting Subwoofer Level Understanding Common OperationsStarting, Pausing & Stopping Playback Playing DiscsStop To stop playback, press the Stop Playing DiscsSelect Next & Previous track/chapter SelectFast Forward & Reverse This section explains how to fast forward and reverseForward Frame-by-Frame Playback To resume normal playback, press Play buttonNavigating DVD & VCD Disc Menus Navigating CDs & Super Audio CDsNavigating MP3 & WMA Discs To stop the slideshow, press the Stop or Menu button Viewing a Slideshow of Jpeg ImagesLoad a Jpeg disc To display thumbnailsListening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioDeleting Presets Presetting AM/FM StationsSelecting Presets Listening to the RadioUsing the Listening Modes Selecting Listening ModesAbout the Listening Modes Listening Mode and Receiver Settings Using the Listening ModesTheater-Dimensional Listening Angle Setting Press and hold the Setup but Ton for 3 secondsPress the Play or Enter but Advanced PlaybackPress the Search button Ton to start playback of the specDuring playback, press the Search button twice Advanced PlaybackSearching by Time Use the number buttons to enter a timeRepeat A- appears onscreen and -RA appears on the display To cancel A-B repeat playback, press the A-B buttonRepeat Playback RepeatRandom Playback SACD, VCD, CD Disc Random, Ran- dom OffRandom Memory Playback Adding New Items to the ListLast Memory Deleting Items from the ListEditing Steps Zoom x1.0 appears onscreen ZoomingSelecting Camera Angles Press the Zoom again repeat- edly to ZoomSelecting Soundtracks Selecting SubtitlesDisc Information Disc and Input InformationDisplaying Information Input InformationControlling a TV connected to the DVD receiver Entering Remote Control CodesControlling Other Components Controlling a TVControlling Other Components Audio Input Setup Configuring the DVD receiverSetup Menu Digital Input Signal FormatsConfiguring the DVD receiver Input Default assignment Audio Input SetupDigital Input Signal Formats Crossover FrequencyDVD Onscreen Setup Menus When you’ve finished, press DVD Onscreen Setup MenusUsing the Onscreen Setup Menus Setup button againPicture Menu View ModeHdmi Output Setting TV ShapeHD Jpeg Mode Progressive SettingHD Resolution Video Black LevelAudio Menu Language MenuSelecting Other Languages When you’ve finished, press the Enter buttonUse this list when specifying other languages Select Others from the Disc Menu Language, Audio LanOn-Screen Display Color Display MenuOn-Screen Display BackgroundChange the Security Code Operation Setting MenuSetting the Parental Lock Tal lock, and then pressDVD Priority Contents Sacd Priority ContentsAdditional information Resetting the receiverDisc Content Organization DVD-Video regionsGlossary Additional informationMP3, WMA & Jpeg Files Dynamic range Hdcp High-bandwidth Digital Content ProtectionPAL Phase alternation by line File extensionTroubleshooting PowerAudio Troubleshooting VideoMake sure the source material is Dolby Digital Tuner Disc PlaybackConnection with External Devices Set the DVD Priority Contents setting to DVD-VIDEOSet the Sacd Priority Contents setting to Multi ch Area Disc may have been illegally copiedDisplayed ID Message Hdmi Status ModeNo picture from the Hdmi connection HdcpVideo Section SpecificationsAmplifier Section Tuner SectionRemote Control Codes List Remote Control Codes List KLL KECKLH KTVSEG RCASBR SKYTV/DVD Combination 3 4 4 5 6

DSR-4.8 specifications

The Integra DSR-4.8 is a powerful and versatile multi-zone audio/video receiver that targets home theater enthusiasts and audiophiles alike. This advanced receiver is engineered to offer exceptional sound quality and system flexibility, making it an ideal centerpiece for immersive entertainment experiences in medium to large spaces.

One of the standout features of the Integra DSR-4.8 is its impressive audio capabilities. It supports a robust 9.2-channel configuration, allowing for a comprehensive surround sound setup that can accommodate various speaker configurations. The receiver touts high-resolution audio support, including formats like Dolby Atmos and DTS:X, ensuring that users enjoy a cinematic sound experience with remarkable detail and clarity. With integrated Dirac Live room correction technology, the DSR-4.8 adjusts the audio output for optimal performance based on the room’s acoustics.

In terms of video performance, the DSR-4.8 supports 4K Ultra HD video passthrough, allowing it to easily integrate with modern 4K sources. It comes equipped with multiple HDMI inputs, including support for HDCP 2.3, ensuring compatibility with the latest devices and formats. Additionally, the receiver is built to handle advanced video processing, featuring technologies like HDR, Dolby Vision, and HLG for enhanced picture quality and vibrant, lifelike visuals.

The Integra DSR-4.8 is also designed for seamless connectivity. With built-in Wi-Fi and Bluetooth capabilities, users can stream music directly from their smartphones or tablets. The receiver supports various streaming platforms, giving users access to thousands of internet radio stations and popular music streaming services. This open connectivity extends to its compatibility with smart home systems, making it easy to integrate into a wider home automation setup.

In terms of user interface, the DSR-4.8 features an intuitive on-screen display and a user-friendly remote control. The receiver also allows for custom zone configurations, enabling users to enjoy different audio sources in separate areas of their homes.

In summary, the Integra DSR-4.8 combines high-performance audio and video capabilities with flexible connectivity options, making it a fantastic choice for those looking to elevate their home entertainment experience. Its advanced technologies and thoughtful design ensure that users can enjoy both superior sound and visual quality, making it a worthy investment for any home theater setup.
Top Page Image Contents