Integra DSR-4.8 Initial Setup, First Time Setup, Use the Up and Down, Buttons to select TV Shape

Initial Setup

This chapter explains the settings you need to make the very first time the DVD receiver is turned on. Basically this manual contains procedures using the remote controller.

Enter

First Time Setup

The very first time you turn on the DVD receiver, the “Initial Setup” menu appears onscreen.

Initial Setup

TV Shape

HDMI Output Setting	✔ 4:3 Letter box
	4:3 Pan Scan
On-Screen Language	16:9 Widescreen
	16:9 Compressed

Here you need to make a few settings to get the DVD receiver up and running. You can change these settings later (see page 57).

1	Use the Up and Down [ ]/[ ]
	buttons to select “TV Shape”,
	and then press [Enter].

Select “4:3 Letter box” or “4:3 Pan Scan” if you have a 4:3 TV. Select “16:9 Widescreen” or “16:9 Com- pressed” if you have a widescreen TV. See page 59 for more information.

	Initial Setup
	TV Shape	✔ 4:3 Letter box
	HDMI Output Setting
			4:3 Pan Scan
	On-Screen Language		16:9 Widescreen
			16:9 Compressed
	The “HDMI Output Setting” menu
2	appears next.
	Use the Up and Down [			]/[	]
	buttons to select “On” or “Off”
	for “HDMI Output Setting”, and
	then press [Enter].
	Select “On” to use the HDMI output.
	Initial Setup
	TV Shape	: 4:3 Letter box
	HDMI Output Setting	✔	On
	On-Screen Language		Off
	The “On-Screen Language” menu
3	appears next.
	Use the Up and Down [			]/[	]
	buttons to select a language, and
	then press [Enter].
	See page 61 for more information on
	the language options.
	TV Shape	: 4:3 Letter box
	HDMI Output Setting : On
	On-Screen Language	✔	English

Français

Español

Deutsch

Italiano

The “Initial Setup” menu closes and the setup is complete.

The DVD receiver is now ready to use.

Note:

You can cancel the “Initial Setup” by pressing the [Setup] button and complete the settings later by using the onscreen setup menus (see page 57).

29