Integra ADM-2.1 instruction manual Specifications, Amplifier Section

Specifications

AMPLIFIER SECTION
Power Output:	100 Watts per channel min. RMS at
	8 ohms, both channel driven from
	20 to 20,000 Hz with no more than
	0.08 % total harmonic distortion.
	125 Watts per channel min. RMS at
	6 ohms, both channel driven from
	1 kHz with no more than 0.1 %
	total harmonic distortion.
Dynamic Power Output:	2 × 140 Watts at 8 ohms
Total Harmonic Distortion:	0.08 % at rated power
IM Distortion:	0.08 % at rated power
Damping Factor:	100 at 8 ohms
Input Sensitivity and Impedance:	1 V, 50 kohms
Output Level and Impedance:	1 V, 10 kohms
Rated Speaker Impedance:	6 ohms MIN
Frequency Response:	10 Hz – 100 kHz, ±1 dB
Signal-to-Noise Ratio:	110 dB (IHF A, 0.5 V input)

GENERAL
Power Supply:	AC 120 V, 60 Hz
Power Consumption:	2.5 A
Dimensions (W × H × D):	435 × 145 × 316 mm
	17-1/8" × 5-11/16" × 12-7/16"
Weight:	8.5 kg, 18.7 lbs.

Specifications and features are subject to change without notice.

Integra Division of

ONKYO U.S.A. CORPORATION

200 Williams Drive, Ramsey, N.J. 07446, U.S.A.

Tel: 201-825-7950 Fax: 201-825-8150 E-mail: integra@onkyousa.com

Integra Division of

ONKYO CORPORATION

Sales & Product Planning Div. :

2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN

Tel: 072-831-8111 Fax: 072-833-5222

SN 29343005 W0008-1

E

#US_ADM-2.1_08.p65 8 8/25/00, 6:22 PM