Kenwood KTC-SR901 instruction manual Contents, Safety precautions

Contents
Safety precautions	3

Safety precautions

2WARNING NOTE

Operations
ESN display	4
Selecting Sirius Mode	4
Switching Seek Mode	4
Selecting the Preset Band	5
Channel Preset Memory	5
Preset Tuning	5
Channel Scan	6
Channel Search	6
Switching Category	6
Direct Access Tuning	6
Switching Display	7
Installation
Accessories	8
Installation Procedure	8
Connecting Wires to Terminals	9
Installation	10
Troubleshooting guide	11
Specifications	12

❈Displays shown in this manual are for descriptive purposes only, and may differ from actual displays.

To prevent injury and/or fire, take the following precautions:

•When extending the battery, or ground wires, make sure to use automotive-grade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating.

•Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts.

•To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit.

•If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer.

•Be careful not to drop the unit or subject it to strong shock.

2CAUTION

To prevent damage to the machine, take the following precautions:

•Make sure to ground the unit to a negative 12V DC power supply.

•Do not open the top or bottom covers of the unit.

•Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

•When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.

•During installation, do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit.

•When drilling a hole in the car to fix the brackets, make sure not to damage the fuel tank, brake tube, wiring harnesses, etc. on the other side.

•If you experience problems during installation, consult your Kenwood dealer.

•If the unit does not seem to be working right, try pressing the reset button on the control unit first. If that does not solve the problem, consult your Kenwood dealer.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

Cleaning the Unit

If the front panel is dirty, wipe it clean with a silicon cloth or soft dry cloth with the power off.

2CAUTION

Do not use hard cloths or paint thinner, alcohol, or other volatile solvents. These may damage external surfaces or remove indicator characters.

IMPORTANT INFORMATION

About the disc changer to be connected:

To connect a disc changer having the "O-N" switch to this unit, set the "O-N" switch to "N". To connect a disc changer having no "O-N" switch to this unit, the converter cord CA- DS100 and/or switching adapter KCA-S210A are required as options.

2 -English English- 3