CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury.

Leaking, overheating, or burst battery could result in fire or injury.

Use battery with the correct specification for the camera.

Do not short circuit, heat or dispose of battery in fire.

Do not insert the battery with the polarities reversed.

Remove the battery when not planning to use the camera for a long period of time. Battery may leak corrosive electrolyte and permanently damage the camera’s components.

Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it continuously. It may cause burns.

Do not move the camera while it is switched on when you are using the Charger. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock.

Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction.

Avoid obstructing the lens or the flash when you capture an image.

When using this camera in low temperatures, you may experience the following. These are not camera malfunctions and usually recover at normal temperature.

It takes longer to turn on the LCD monitor and the colour may differ from the subject.

When changing the composition, there may be an after image on the LCD monitor.

Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip cards near the case.

It is highly likely to result in computer malfunctions when the 20 pin connector is connected to the USB port of a PC. Never connect the 20 pin connector to USB port of a PC.

Contents

READY

007

Package Contents

 

 

007

Included Contents

 

 

007

Sold Separately

 

 

008 Identification of features

 

 

008

Front & Top

 

 

009

Back

 

 

010

Bottom

 

 

010

5 Function button

 

 

012 Connecting to a power source

 

 

015

Inserting the battery

 

 

015 Inserting the memory card

 

 

016 Instructions on how to use the memory

 

 

card

 

 

018 When using the camera for the first

 

 

 

time

 

RECORDING

019

LCD monitor indicator

 

 

020 Starting the Recording mode

 

 

020

Selecting modes

 

 

020

How to use the Auto mode

 

 

021

How to use the Program mode

 

 

021

How to use the Manual mode

 

 

021

How to use the DUAL IS(Dual Image

 

 

Stabilization) mode

 

 

022

How to use the Beauty Shot mode

 

 

022

How to use the Nightscene modes

 

 

022

How to use the Scene modes

 

 

024

How to use the Movie clip mode

 

 

024

Recording HD (High Definition) movie clips

 

025

Recording the movie clip without sound

 

025

Pausing while recording a movie clip

 

 

 

(Successive Recording)

003

 

 

 

Page 4
Image 4
Samsung HZ10W manual Contents