020

Starting the Recording mode
How to use the Auto mode

Select this mode for quick and easy picture taking with minimal user

interaction.

1. Insert the battery (p.15) taking note of
the correct polarity (+/-).
2. Insert the memory card (p.15). As
this camera has a 30 MB internal
memory, it is not essential to insert the
memory card. If the memory card is not
inserted, an image will be stored in the
internal memory. If the memory card is
inserted, an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the POWER button to turn on the camera. (If the date/time that
is displayed on the LCD monitor is incorrect, reset the date/time before
taking a picture.)
5. Select the Auto mode by using the mode dial.
6. Point the camera towards the subject and compose the image.
7. Press the Shutter button to capture an image.
If the auto focus frame turns to red when you press the Shutter
button down half way, it means that the camera cannot focus
on the subject. Should this be the case, the camera is less
likely to capture an image clearly.
Avoid obstructing the lens or the fl ash when you capture an
image.
Selecting modes

You can select the shooting modes by using the mode dial on the

upper of your camera.

How to use the mode dial

Select the shooting mode by turning the mode dial to the selection point.
Scene mode
Beauty Shot mode
Nightscene mode
Movie Clip mode
DUAL IS(Dual Image
Stabilization) mode
Auto mode
Program mode
Manual mode
Select point
1
1