Using the Parrot MKi9000 for the 1st time

Installing the electronic box

Avoid installing the electronic box:

-near heating or air-conditioning system;

-on a spot directly exposed to sunlight;

-behind metal walls.

Installing the remote control

•Choose the place for the remote control inside your vehicle. We would advise you to fit it in the centre of the dashboard.

•If you want to place the remote control on the steering wheel, make sure it is securely attached, so it does not move when you are driving. Do not install the remote control on the outside of the steering wheel, so that it does not get in the way when driving. Refer to the diagrams p.6.

•If you want to place the remote control on the dashboard, stick the double-sided tape located on the flat side of the bracket to fix it against the dashboard. You can then insert the remote onto the bracket. Refer to the diagrams p.7.

Installing the microphone

The microphone must be aimed at the driver and can be installed between the sun-visor and the internal rear-view mirror.

Navigating through the menus

•Press the central jog dial to access the menus. > The kit says the name of the current menu.

•Browse through the menus by turning the wheel and confirm with the green button or by pressing the scroll wheel.

•To exit the menu, press the red button or wait a few seconds.

Pairing a phone to the PARROT MKi9000

Prior to using your Parrot MKi9000 with your phone for the very first time, you must initially pair both devices.

1.From your phone, search for Bluetooth peripherals

(refer to your phone’s user guide for more information).

2.Select «MKi9000» in the list.

3.Enter «0000» on your phone when prompted.

4.Press the green button to accept the pairing

> The Parrot MKi9000 says «Pairing successful» .

Depending on the model of your phone, step 3 and step 4 may be inverted.