Clark Synthesis TA1501C owner manual LF Center RF LFE/SUB CH1 CH2 CH3

SETTING UP YOUR AMPLIFIER

Right Front (RF) and Left Front (LF) Hookup

For this hookup, connect the RF and LF Pre-Amp Outputs to the TA1501C amplifier inputs.

NOTE: Not all receivers have Pre-Amp outputs for the Right Front and Left Front outputs. If you have a question about your receiver’s outputs, please consult your owner’s manual or contact your receiver’s manufacturer.

TA1501C Amplifier Surround-Sound Receiver

L	Pre-Amp Audio Out
R	LF	RF
OUT IN
–	+

Transducer Output

Transducer

Multiple Signal Hookup

This configuration is a little more complicated. You will need a small mixer to make this work. Connect the signals you want to use to the mixer input. Then, connect the mixer output to the TA1501C amplifier input using a “Y” adapter.

TA1501C Amplifier

L

R

OUT IN

– +

Transducer Output

Transducer

Surround-Sound Receiver

Pre-Amp Audio Out

LF CENTER RF LFE/SUB

CH1	CH2	CH3	CH4
OUTPUT

Mixer

Y Adapter

www.clarksynthesis.com TA1501C Amplifier 17