Sonance 875D SE instruction manual Specifications, Installation Examples

Page 17

SONAMP® 875D SE 8-CHANNEL AMPLIFIER

Specifications

Number of Channels:

8 (four stereo pairs)

Output Power (Stereo):

75 watts RMS per channel (X8), 0.25% THD, 20Hz – 20kHz, @ 8 ohms;

 

140 Watts per channel (X8), 0.1% THD, 1kHz, @ 4 ohms

Output Power (Bridged):

300 Watts per channel (X4) @ 8 ohms

Frequency Response:

20Hz – 20kHz, ±1dB

Total Harmonic Distortion:

0.05% (1kHz, 8 ohms); 0.10% (1kHz, 4 ohms)

Signal to Noise Ratio:

-96dB (w/22kHz filter)

Input Sensitivity:

1.5V for 75W RMS Output

 

1.3V w/BBE ON (+6dB)

 

1.0V w/BBE ON (+9dB)

Input Impedance:

10k ohms

Maximum Source Input Voltage:

4.0 VAC RMS

 

3.0V AC RMS w/BBE ON

Loop Output Impedance (Buffered):

100 ohms

Serial Protocol (RS-232 Connection):

9600, N, 8, 1, single CR

Power Consumption:

1,200 Watts

BTU/HR:

850

AC Fuse:

10A (T10AL ~ 250V)

Dimensions (WxHxD):

16½” x 3 7/8” x 17¼” (419mm x 98mm x 438mm)

Dimensions (w/Rack Ears, WxHxD):

19” x 2½” x 17¼” (483mm x 64mm x 438mm)

Shipping Weight:

47 lbs (21.4kg)

Installation Examples

The illustrations on the following pages show the wide variety of audio and audio/video systems that can be assembled using one or more Sonamp 875D SE amplifiers. Your local authorized Sonance dealer is an expert in audio/video system planning and installation. Sonance strongly recommends that you work with your dealer to ensure that your system is properly planned, assembled and installed.

17

Image 17
Contents Sonamp 875D SE Page Ance to Rain or MOISTURE. Important Safety InformationIntroduction Design and FeaturesFront Panel Unpacking Box ContentsPlacement Over-Current Protection Protection CircuitsThermal Protection Replacing the Fuse see Figure Powering the AmplifierPower Cord see Figure Source Connections see Figures 6 Input Assignment DIP Switches see FigureUse Good Speaker Wire Input Sensitivity AdjustmentSpeaker Connections Speaker Connections for Stereo Operation see FigureFlip Outer 2 Levers UP Speaker Connections for Bridged Operation see Figures 11Auto-On Auto Audio Trigger ModeVoltage Trigger Mode BBE Sound Enhancement OFF Bypass ModeZone Trigger Outputs Connecting the 875D SE to a Serial Control DeviceSerial Control Enabling 875D SE Zone Serial Control875D SE Serial Commands Serial Control Notes Installation Examples SpecificationsZone Processor System 2 7.1-Channel Home Theater SystemFor ALL Channels System 3 Multi-Zone System with ControllerFor ALL AL2 Control Output K2 Rear Panel Important Freight collect shipments will be refused Technical Assistance and ServiceExclusions and Limitations Limited Warranty Coverage U.S.A. OnlySystem Notes
Related manuals
Manual 4 pages 47.33 Kb

875D SE specifications

The Sonance 875D SE represents a pinnacle in high-performance audio solutions, catering specifically to discerning audiophiles and professional installers alike. This powerful amplifier combines cutting-edge technology with superior engineering, providing an exceptional listening experience that resonates with clarity and precision.

One of the standout features of the 875D SE is its Class D amplification, which delivers high efficiency without compromising on sound quality. This amplifier is designed to provide a robust output, allowing it to drive a wide array of speaker configurations with ease. With its ability to produce up to 75 watts per channel into 8 ohms, users can enjoy rich, dynamic sound in various settings, from residential to commercial environments.

The 875D SE is equipped with advanced digital signal processing (DSP), offering users a comprehensive array of tuning capabilities. This technology ensures optimal audio performance by enabling precise adjustments for room acoustics, allowing users to customize their listening experience. The integrated DSP also features a 30-band equalizer and multiple crossover settings, enhancing system flexibility and ensuring compatibility with a variety of speaker setups.

Another key characteristic of the 875D SE is its multi-zone functionality, which allows users to distribute audio across multiple rooms or spaces. With support for up to four independent zones, each zone can be controlled separately, delivering exceptional convenience in whole-home audio solutions. This is complemented by the amplifier’s intuitive interface and compatibility with various control protocols, making integration into existing systems seamless.

The build quality of the 875D SE reflects Sonance's commitment to durability and reliability. Encased in a robust chassis, the amplifier is designed to withstand the rigors of installation and everyday use. Additionally, its sleek design ensures it can be placed in any environment without detracting from the overall aesthetic.

Connectivity is another strong suit of the 875D SE, featuring multiple inputs, including balanced XLR and unbalanced RCA options. This versatility allows for simple integration with various audio sources while ensuring minimal signal interference. Furthermore, the amplification system is designed for easy installation, with user-friendly features that simplify the setup process.

In summary, the Sonance 875D SE is a formidable audio amplifier that delivers exceptional performance, versatility, and ease of use. With its advanced features, superior sound quality, and robust design, it stands out as a leading choice for both audiophiles and professional applications, ensuring immersive sound experiences across diverse environments.