Sonance 875D SE instruction manual Box Contents, Unpacking, Placement

Page 6

SONAMP® 875D SE 8-CHANNEL AMPLIFIER

Box Contents

Your Sonamp 875D SE box should contain the following items:

(1)Sonamp 875D SE amplifier

(2)Rack ears

(6)Removable control connectors — connected to the amplifier’s rear panel

(4)Removable speaker connectors — connected to the amplifier’s rear panel

(1)IEC Power cable

Unpacking

Save the shipping carton and polystyrene inserts so you can safely transport your amplifier in the future. Before you install the amplifier, locate the serial number on the rear panel and note it here for future reference:

S/N: __________________

Placement

IMPORTANT: To avoid damage, the amplifier must always rest on its four feet to allow sufficient clearance for proper ventilation.

Place the Sonamp 875D SE on a level surface, in an upright position, out of direct sunlight and away from windows through which rain may enter.

Situate the amplifier away from heat sources such as hot air ducts or radiators. Be sure that the amplifier is adequately ventilated by convection cooling or suitable cabinet fans.

IMPORTANT: The 875D SE requires four inches of clearance on the top and all sides.

•Never place any object on or against the amplifier.

•Never operate the amplifier on a carpeted surface as this will compromise ventilation.

•When the amplifier is installed in any cabinet, the front or back must be open during operation. Alternately, install fans in the cabinet to assure continuous ventilation.

•When rack-mounting, use nylon washers on both sides of the ears to isolate the amplifier from the rack and prevent ground loops and hum problems.

•Very sensitive low-level sources might pick up some hum radiated from the 875D SE’s power supply. If this occurs, move the unit away from the other components.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Sonamp 875D SE Page Important Safety Information Ance to Rain or MOISTURE.Design and Features IntroductionFront Panel Box Contents PlacementUnpacking Protection Circuits Thermal ProtectionOver-Current Protection Powering the Amplifier Power Cord see FigureReplacing the Fuse see Figure Input Assignment DIP Switches see Figure Source Connections see Figures 6Speaker Connections Input Sensitivity AdjustmentUse Good Speaker Wire Speaker Connections for Stereo Operation see FigureSpeaker Connections for Bridged Operation see Figures 11 Flip Outer 2 Levers UPAuto Audio Trigger Mode Voltage Trigger ModeAuto-On OFF Bypass Mode BBE Sound EnhancementSerial Control Connecting the 875D SE to a Serial Control DeviceZone Trigger Outputs Enabling 875D SE Zone Serial Control875D SE Serial Commands Serial Control Notes Specifications Installation ExamplesZone System 2 7.1-Channel Home Theater System ProcessorSystem 3 Multi-Zone System with Controller For ALL ChannelsFor ALL AL2 Control Output K2 Rear Panel Technical Assistance and Service Important Freight collect shipments will be refusedLimited Warranty Coverage U.S.A. Only Exclusions and LimitationsSystem Notes
Related manuals
Manual 4 pages 47.33 Kb

875D SE specifications

The Sonance 875D SE represents a pinnacle in high-performance audio solutions, catering specifically to discerning audiophiles and professional installers alike. This powerful amplifier combines cutting-edge technology with superior engineering, providing an exceptional listening experience that resonates with clarity and precision.

One of the standout features of the 875D SE is its Class D amplification, which delivers high efficiency without compromising on sound quality. This amplifier is designed to provide a robust output, allowing it to drive a wide array of speaker configurations with ease. With its ability to produce up to 75 watts per channel into 8 ohms, users can enjoy rich, dynamic sound in various settings, from residential to commercial environments.

The 875D SE is equipped with advanced digital signal processing (DSP), offering users a comprehensive array of tuning capabilities. This technology ensures optimal audio performance by enabling precise adjustments for room acoustics, allowing users to customize their listening experience. The integrated DSP also features a 30-band equalizer and multiple crossover settings, enhancing system flexibility and ensuring compatibility with a variety of speaker setups.

Another key characteristic of the 875D SE is its multi-zone functionality, which allows users to distribute audio across multiple rooms or spaces. With support for up to four independent zones, each zone can be controlled separately, delivering exceptional convenience in whole-home audio solutions. This is complemented by the amplifier’s intuitive interface and compatibility with various control protocols, making integration into existing systems seamless.

The build quality of the 875D SE reflects Sonance's commitment to durability and reliability. Encased in a robust chassis, the amplifier is designed to withstand the rigors of installation and everyday use. Additionally, its sleek design ensures it can be placed in any environment without detracting from the overall aesthetic.

Connectivity is another strong suit of the 875D SE, featuring multiple inputs, including balanced XLR and unbalanced RCA options. This versatility allows for simple integration with various audio sources while ensuring minimal signal interference. Furthermore, the amplification system is designed for easy installation, with user-friendly features that simplify the setup process.

In summary, the Sonance 875D SE is a formidable audio amplifier that delivers exceptional performance, versatility, and ease of use. With its advanced features, superior sound quality, and robust design, it stands out as a leading choice for both audiophiles and professional applications, ensuring immersive sound experiences across diverse environments.
Top Page Image Contents