MotoSAT 901NOMAD 2IM Troubleshooting, LED Flashing Error Meaning Possible Cause and Solution

Page 16

TROUBLESHOOTING

Before accepting any of the flashing LED codes, perform a TEST DISH to see if the error continues. If it does then you can follow the information listed below. If the problem persists and you can find no solution then please call our Technical Support Line 800­247­7496 for further assistance.

ERROR CODES ARE FLASHING LED LIGHTS AT 1 SECOND INTERVALS

LED FLASHING

ERROR MEANING POSSIBLE CAUSE AND SOLUTION

Stow

This is not an error but

 

indicates the motors are

 

moving

If Stow is flashing and the mount is not moving look for a stripped gear

Find

Invalid Mode selected,

Reprogram the Nomad Controller

 

Skewable vs. Non­

 

 

Skewable.

 

Find and Stow

Invalid Mode.

Reprogram the Nomad Controller

Peak

Motor Time Out. No

Dish blocked from moving or bad Elevation

 

counts in Elevation.

Sensor

Peak and Stow

Motor Time Out. No

Dish blocked from moving or bad Azimuth

 

counts in Azimuth.

Sensor

Peak and Find

Motor Time Out. No

Dish blocked from moving or bad Skew

 

counts in Skew.

Sensor

Peak, Find and Stow

Limit Error in Elevation

Dish blocked from moving or bad Elevation

 

movement.

Sensor

DVB

Limit Error in Azimuth

Dish blocked from moving or bad Azimuth

 

movement.

Sensor

DVB and Stow

Limit Error in Skew

Dish blocked from moving or bad Skew

 

movement.

Sensor

DVB and Peak

Only Main satellite found. Dish line of sight blocked, try different

 

 

location

DVB, Peak and Stow

Main satellite not found

Dish line of sight blocked, try different

 

but Secondary satellite

location

 

was.

 

DVB, Peak, Find and Stow

Signal lost, NO LNB

Check Satellite Receiver power

 

Power

 

Lock

No satellite found.

Dish line of sight blocked, try different

 

 

location, possible connection or LNB failure

Lock and Stow

Over Temperature on

Operational limit of your electronics has

 

Satellite Receiver.

been exceeded, provide proper ventilation

Lock and Find

Dish did not raise high

Dish blocked from moving or bad Elevation

 

enough.

Sensor

16

Image 16
Contents Installation Manual Table of Content Nomad 2 Universal Controller Specifications Nomad 2 Controller First Time Setup First Time Installation Mount Cable ConnectionsFront Panel Buttons Nomad 2 Universal Controller Front PanelFront Panel LED’S Power Connector Rear ConnectionsPage Sample Wiring for Receiver Information Wiring Legend Open Face TV MountsProgramming Nomad 2 Program LED’s Troubleshooting LED Flashing Error Meaning Possible Cause and SolutionMD1000.2 Limitations Star Choice Page Stowing the dish when all else fails Emergency StowSoftware Upgrade Options Nomad 1 & Nomad Nomad Nomad Your Hyperterminal Settings are NOW Configured YOU will Receive the local Prompt Back Your Nomad 1 or 2 has NOW Been Upgraded

901NOMAD 2IM specifications

The MotoSAT 901NOMAD 2IM is a state-of-the-art mobile satellite communication system designed to provide seamless connectivity in various environments, from remote locations to urban settings. Ideal for users in industries such as emergency response, military operations, and outdoor broadcasting, the MotoSAT 901NOMAD 2IM ensures high-speed internet access and reliable communications on the go.

One of the standout features of the MotoSAT 901NOMAD 2IM is its advanced auto-acquisition technology. This system allows the satellite dish to automatically find and lock onto the desired satellite signal with minimal user intervention. This capability not only simplifies the setup process but also enables users to focus on their tasks rather than the technicalities of satellite alignment.

The 901NOMAD 2IM comes equipped with a high-gain, lightweight antenna that is designed for enhanced performance. The antenna's compact design makes it portable and easy to deploy, while still providing robust signal reception. This ensures that users can maintain reliable communication even in challenging environments where traditional communication methods may falter.

Another significant advantage of the MotoSAT 901NOMAD 2IM is its compatibility with various satellite network providers. This flexibility allows users to choose the service that best fits their needs, ensuring optimal connectivity and coverage. The system supports both standard-definition and high-definition video streaming, making it ideal for live broadcasts and remote production work.

In terms of robustness, the MotoSAT 901NOMAD 2IM is designed to withstand harsh conditions. Its durable construction and weather-resistant materials ensure that it performs reliably in extreme temperatures and adverse weather conditions. This durability makes it a trusted choice for professionals who need dependable communication solutions, regardless of their location.

The MotoSAT 901NOMAD 2IM also features user-friendly interface controls, making it accessible for both seasoned professionals and newcomers. With intuitive controls and clear indicators, users can quickly adjust settings and monitor their connection status.

In summary, the MotoSAT 901NOMAD 2IM is a powerful mobile satellite communication system that combines advanced technology, ease of use, and exceptional performance. Its auto-acquisition feature, portability, and robust design make it an ideal choice for anyone needing reliable satellite coverage in remote or challenging environments. Whether for emergency services, military applications, or broadcasting, the MotoSAT 901NOMAD 2IM stands ready to meet the demands of modern communication.