Ref. # Description

1Antenna

2Countersink screws

3Mounting surface

4O-ring

5Pre-drilled mounting holes

4.Remove the dust cap from the antenna’s TNC connector.

5.Attach the coaxial cable’s male TNC connector to the antenna’s TNC connector.

Ref. # Description

1Mounted antenna

2Mounting surface

3TNC connector

4Coaxial cable

6.Attach the other end of the coaxial cable to the antenna input port on the receiving device. The receiving device must be equipped to provide power as detailed in the SPECIFICATIONS section of this guide. All NovAtel GNSS receivers provide the necessary power through the antenna RF connectors.