Magenta NEC 600 setup guide Specifications

Page 4

MAGENTA MULTIVIEW™ SERIES

1. Specifications

Cable Required: Category 5, 5e, 6 shielded or unshielded twisted pair

Compliance: CE; FCC Class A, IC Class A

Video Support: all supported VESA modes to WUXGA (1920x1200), RGBHV,

HDTV modes including 1080p, 1080i, 720p

(Note: The NEC 600 does not support component, composite or S-video video signals)

Resolution and

Refresh Rate: At 600 ft. (183 m) or less: a maximum of 1920x1200

Required Source

Impedance: Video OUT: 75 ohms;

Audio models: Audio OUT (if any): 600 ohms maximum

Required Destination

Impedance: Video IN: 75 ohms;

Audio models: Audio IN (if any): 600 ohms minimum

Audio

Characteristics: Full Stereo

Line Level 600 Ohm Unbalanced

Serial

Characteristics: Protocol: Asynchronous; transparent to data format; 3 wire, baud rate of 9600*

Connectors: (2) RJ-45, (1) DB9M (console only, not for SAP use)

Temperature

Tolerance: Operating: 32 to 104°F (0 to 40°C);

Storage: -4 to +140°F (-20 to +60°C)

Humidity

Tolerance: Up to 80% noncondensing

Enclosure: Steel

Power: N/A—power supplied by display.

There are no provisions for external power

Size: 1.6"H x 6.8"W x 11.4"D (4.0 x 17.3 x 28.9 cm)

Weight:

2.2 lb. (1.0 kg)

*The serial baud rate may be changed internally via SAP commands (see SAP communication Protocol User Manual), however it is recommended to use 9600 baud for best performance.

2

Image 4
Contents MultiView Magenta ResearchMagenta Multiview Series Contents Specifications Overview IntroductionCompatible Cabling Cabling Considerations Setup and InstallationMaking the Connections Setup & Installation Video Adjustment Cable Distance Compensation SettingsSkew Compensation Settings Image Adjustment Utility-SkewTroubleshooting Common ProblemsProblem SolutionProblem Solution Appendix A. Cabling Pinouts Table A-1. T568B CAT5 pinoutAppendix B. Setting Sync Mode Appendix C. SAP Addressing Dec HexAppendix D. Rotary Knob Menu 5secMagenta Research