Magenta NEC 600 setup guide Problem Solution

.

Problem:	“Green shift” or “green washout” on multimedia signals.
Solution:	The standard video/serial model is designed to function with DC
	coupled signals in which the black level is referenced to 0 volts.
	Nearly all VGA cards function this way.
	Some media servers, however, provide AC coupled signals and
	can cause a green color shift in the video. This is a result of the
	sync clamping on the red and blue channels of the video/serial
	model.
	For five-component (RGB/H&V) AC coupled video, the
	MultiView CAT5 XRTx Universal transmitter has been designed
	with full DC restoration capability. This problem is easily solved
	via a simple switch setting in the XRTx Transmitter. Please refer to
	the XRTx Transmitter user manual.
Problem:	Image has purple/blue tint
Solution:	Display gain may need adjustment. Older displays may have an
	incorrect gain adjustment setting. This requires using the remote to
	access the “expert mode” . Please contact NEC technical support or
	Magenta Research for assistance in this.
	Displays purchased after May 2009 should not require this.
Problem:	Notes on Daisy Chaining:
Solution:	When daisy chaining, the maximum cable distance is not increased
	beyond the rated distance of the receiver used. For example, an
	AK600 can only daisy chain within 600 ft of the transmitter.
	It is possible to daisy chain out of a short range receiver into a longer
	range receiver to increase the range. For example, over 600 ft an
	AK600 can be daisy chained into an AK1200 which allows for daisy
	chaining to 1,200 ft.
	• When using NEC600 SAP units, a maximum of 10 units may be
	daisy chained within the rated cable length of the receiver if
	using standard CAT5/6 or a maximum of 7 units may be daisy
	chained within the rated cable length of the receiver if using
	skew-free cable.
	• Note that if SA/SAP units are used for video only and the SA/
	SAP option is not in use, then you may daisy chain to 12 units.

9