JVC KV-C10 manual Setting the channel selection, Set the channel selection to Auto or Manual

ENGLISH

Setting the channel selection

You can set the channel selection method either to select only the receivable channels in memory or to select all the channels.

Remember that if you want to select only the receivable channels, you must store the channels first. To store them, see page 11.

		2	1		1			MONI
						VOL	CH	VOL
						H/P	MODE	H/P
							CH
						COLOR	BRIGHT	CONTRA
DOWN	UP	AUTO/MANU	MODE	POWER				VCR
	KV-M700 color monitor				2
						VOCAL	SKIP	RF
						A.MEMO		CALL
					KV-M700 remote controller
1
Monitor	Remote		Select TV as the input source.
		CH	Press the MODE button on the monitor or the remote
	H/P	MODE H/P	controller repeatedly to select TV.
	VOL	VOL
MODE				TV	VIDEO1	VIDEO2
		CH

2

Monitor Remote

SKIP

AUTO/MANU

Set the channel selection to “AUTO” or “MANUAL.”

Press the AUTO/MANU button on the monitor or the SKIP button on the remote controller.

Each time you press the button, the channel selection alternates between “AUTO” and “MANUAL.”

AUTO:	Only the receivable channels stored in memory
	can be selected.When you change the channel,
	channel number and “AUTO” appear on the
	screen for a while.
	08
	AUTO

MANUAL: All the channels can be selected. (Channel coverage: VHF channels 2 to 12, UHF channels 13 to 69)

12